mark1991
Member +
I was removing my turbo kit last week only to notice after 2 years that the zisco down pipe was only a 2" lol. So i thought 2.5" would be alot better!
So i cut my own cut and sourced my own flanges and lambda thread from an old ct9 Downpipe, and bought 2 90* elbows from ebay costing less that £25.
I made a jig with my zisco down pipe and welded it up, I am happy to say i test fitted it tonight and fits spot on
I am aiming for more power and torque and will be fitting a zisco inlet... and more boost
400 here we go.... i hope
So i cut my own cut and sourced my own flanges and lambda thread from an old ct9 Downpipe, and bought 2 90* elbows from ebay costing less that £25.
I made a jig with my zisco down pipe and welded it up, I am happy to say i test fitted it tonight and fits spot on
I am aiming for more power and torque and will be fitting a zisco inlet... and more boost
400 here we go.... i hope