Dropping the car off at TDI to get mapped and have some work done.

S

sam starlet

Member +
Hey guys just thought Id throw up a thread so I have some where to post up the result later this week.

The engine is the forged lump that was in nightspirits epic track car (persumed to be a HRF engine) not sure if true or not,
TD05-18g looking at running 1.6 1.7 bar
550cc injectors
HKS 5 bar map sensor
front exit exhaust
apexi power FC.
rrfpr
blitz dual sbc boost controller

Looking forward to the result, what do you guys think it might get and winner gets rep lol


cheers


sam
 
faisalgtturbo

faisalgtturbo

Member +
atleast or it should hit 350 bhp
be careful with boost.... unless the head has had work done to it
1.6 bar with no head mods or 1.7 bar + if u have a modded head ported/polished/cams
 
S

sam starlet

Member +
hi guys got the result!

only made 230 at the wheels which is around 270 bhp roughly, had to stop the run at 1.3 bar as the 550cc injectors were maxed out. Im happy with the result for now. cant wait to get it back and see what it feels like!

cheers

sam
 
scot-ish

scot-ish

Member +
yeh, injectors wont max out at that mate, im running same 550's and im making 330bhp. and thats without a RRFPR so at standard fuel pressure.

i reckon you should be making over 350 on that turbo.

theyve made a fuckup, or some1 is having you on.
 
G

Glanza D

Member +
Theres defo something wrong with that pal, ive been running an estimated 260-270bhp on stokc injectors (Albeit running at 120% Duty)
 
stavros

stavros

Member +
This a really handy thread for injector sizing bud:

http://www.toyotagtturbo.com/forums...e-injector-size&highlight=injector+calculator

On that basis ^^

Ive based this on 330hp which your car should be more than good for at a guess


330bhp x 0.55 = 182

182/4 = 45.5 lb/hr


to get the injector size in cc:

45.5 x 10.5 = 478 cc

So your 550cc injectors arent even maxed out at 330 hp mate.

Using that formulae above in reverse your 550cc injectors should max out around 380hp buddy
 
sx_turbo

sx_turbo

Lifer
^^^^^^^that thread should be made a sticky.

maybe they havnt set the injector size information on the pfc correctly.
 
You must log in or register to reply here.
Top