Hi Guys,
I did a light modification on my 4E-FTE machine..
Specs are as below :
Stock Internal with :
-TD04 turbo
-1.2mm metal gasket
-Banana
-38mm wastegate
-SARD FPR
-Walbro 255 L/H
I tried to boost at 1.2bar.. the problem is during tuning AFR is still lean..
I've set the FPR to 3.6bar still lean..
still seeking for the problem..is this something to do with my management unit? pls advice..
I did a light modification on my 4E-FTE machine..
Specs are as below :
Stock Internal with :
-TD04 turbo
-1.2mm metal gasket
-Banana
-38mm wastegate
-SARD FPR
-Walbro 255 L/H
I tried to boost at 1.2bar.. the problem is during tuning AFR is still lean..
I've set the FPR to 3.6bar still lean..
still seeking for the problem..is this something to do with my management unit? pls advice..