Forged Engine Packages

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Tuning Developments now offer a range of Forged Motor Packages to suit everyones needs, we have started with our Stage 1 Forged motor which is uprated in all the right places, keeping consideration to cost yet still being able to run a reliable 250bhp.

For those that are looking to push more power than above we have our Stage 2 Forged Engine that adds afew more well chosen parts to make a rock solid base for a big power setup, we then have our Stage 3 Forged Engine which is designed for the hardcore owner that wants big big power, this build includes a Custom Built TD Race Cylinder Head with lots of extras. All our rebuilt engines are built to the highest standards and only genuine seals and gaskets are used to ensure a quality build over and over again, please see the spec lists below for more information. Custom spec engines are also available and we will happily recommend further parts (e.g. Turbo Setups, Fuel Systems, Engine Management and so on...) if needed.

Stage 1 Rebuilt Engine Specs:

Wiseco 74.5mm Low Compression Piston Kit with Rings and Pins
Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts
Genuine Toyota Headgasket
Genuine Toyota Full Gasket Kit
Genuine Toyota Oil Pump Kit
OEM Water Pump Kit
OEM Cambelt Kit inc Idler & Tensioner
OEM Headbolt Kit & New Washers
ACL Main Bearing Kit
ACL Big End Bearing Kit
ACL Thrust Washer Kit
Fully Machined and Polished 4EFTE Bottom End
Fully Stripped, Cleaned and Rebuilt 4EFTE Cylinder Head to Standard Spec
Block, Head and Rocker Cover Cleaned and Painted in Tuning Developments Black and Silver Theme


This engine is rated to approx 250bhp with the correct supporting modifications (turbo setup, fueling, engine management etc)

Price is £1895 Inc Vat, Plus Delivery

Or

Fitted Price is £2195 Inc Vat, Drive in Drive out service Inc all Fluids

(Price you see is the price you pay)



Stage 2 Rebuilt Engine Specs:

Wiseco 74.5mm Low Compression Piston Kit with Rings and Pins
Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts
Athena 1.4mm Uprated Metal Headgasket
ARP 2000 Uprated Headbolt Kit inc New Washers
Genuine Toyota Full Gasket Kit
Genuine Toyota Oil Pump Kit
OEM Water Pump Kit
OEM Cambelt Kit inc Idler & Tensioner
ACL Main Bearing Kit
ACL Big End Bearing Kit
ACL Thrust Washer Kit
Fully Machined and Polished 4EFTE Bottom End
Fully Stripped, Cleaned and Rebuilt 4EFTE Cylinder Head to Standard Spec
Block, Head and Rocker Cover Cleaned and Painted in our Tuning Developments Black and Silver Theme


This engine is rated to approx 320bhp with the correct supporting modifications (turbo setup, fueling, engine management etc)

Price is £1995 Inc Vat, Plus Delivery

Or

Fitted Price is £2295 Inc Vat, Drive in Drive out service Inc all Fluids

(Price you see is the price you pay)



Stage 3 Rebuilt Engine Specs:

Wiseco 74.5mm Low Compression Piston Kit with Rings and Pins
Scat 4EFTE Forged Conrod Kit with ARP Rod Bolts
Athena 1.4mm Uprated Metal Headgasket
ARP 2000 Uprated Headbolt Kit inc New Washers
ARP 2000 Uprated Main Stud Kit
Genuine Toyota Full Gasket Kit
Genuine Toyota Oil Pump Kit
OEM Water Pump Kit
OEM Cambelt Kit inc Idler & Tensioner
ACL Main Bearing Kit
ACL Big End Bearing Kit
ACL Thrust Washer Kit
Fully Machined and Polished 4EFTE Bottom End
Fully Stripped and Cleaned 4EFTE Cylinder Head Rebuilt to Custom Tuning Developments Race Spec
Block, Head and Rocker Cover Cleaned and Painted in our Tuning Developments Black and Silver Theme


This engine is rated to approx 400bhp with the correct supporting modifications (turbo setup, fueling, engine management etc)

Price is £2995 Inc Vat, Plus Delivery

Or

Fitted Price is £3295 Inc Vat, Drive in Drive out service Inc all Fluids

(Price you see is the price you pay)


All our motors come with a warranty, please contact for full details, We can also run in the engine for you upon request and at extra cost.

We can also advise, supply and fit Suspension Upgrades, Brake Upgrades, Engine Management and Mapping and so much more!

Prices are subject to the exchange of a complete engine in good working order, a surcharge maybe applied if this criteria is not met.

Kind Regards,
Tuning Developments LTD
 

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Cheers guys,

Trying our best with pricing whilst not comprimising quality and the components used :)

Cheers

Mike Jones
Tuning Developments Ltd
 

96v

Member +
sounds like a silly question, but i take it you can do a 5e build? if so how much for a similar build as the stage 3 but with 5e components :)
 
Top