danwheeler2k11
Member +
this is the wiring loom highlighted runs across the top of the rad what hapens to this, and what happens to the fan switch that ive put an arrow next to asweel?
Last edited:
The gas should not be released to air for environmental reasons, its dangerous also if you are in a confined space and its inhaled. So if by ACCIDENT you loosen the 2 bolts on the top of that cannister in front of the rad and pull that bit off and the gas starts to escape, dont hang about, walk away from it until it stops leaking and has cleared away
Long time since I done this but think thats the pressure switch you need to keep connected.
The gas should not be released to air for environmental reasons, its dangerous also if you are in a confined space and its inhaled. So if by ACCIDENT you loosen the 2 bolts on the top of that cannister in front of the rad and pull that bit off and the gas starts to escape, dont hang about, walk away from it until it stops leaking and has cleared away
Long time since I done this but think thats the pressure switch you need to keep connected.
sssshhhhh! lolyou also forgot its illegal to release the gas into the atmosphere
you also forgot its illegal to release the gas into the atmosphere
To KNOWINGLY release it to atmosphere, they wont prosecute you for a leak.