Hi guys,
I was having some overheating problems on heavy loads(high throttle for 30secs, maintain at high speed) initially.
My mechanic got the head out, skimmed the head(there was warpage), replaced the pistons rings and rod bearings and fit it all back.
After doing some running in, I brought the car up to the same situation as before thinking that the overheating problem is gone. To my horror, the engine temperature still rises above half when I pick up speed. Any idea why this is happening?
The entire cooling system is clean, the thermostat is new, and the water pump seems seems fine as it was replaced 1year ago.
What are the chances of the block deck surface being warped? Running on stock headgasket btw
I was having some overheating problems on heavy loads(high throttle for 30secs, maintain at high speed) initially.
My mechanic got the head out, skimmed the head(there was warpage), replaced the pistons rings and rod bearings and fit it all back.
After doing some running in, I brought the car up to the same situation as before thinking that the overheating problem is gone. To my horror, the engine temperature still rises above half when I pick up speed. Any idea why this is happening?
The entire cooling system is clean, the thermostat is new, and the water pump seems seems fine as it was replaced 1year ago.
What are the chances of the block deck surface being warped? Running on stock headgasket btw