hi guys im new here

A

accent_97

Member +
this is the intercooler i bought out from scrap yard 2.0ltr fiat coupe

Picture005-1.jpg
 
A

accent_97

Member +
now the only i need find 2 reducers 90 degrees from 60mm to 30mm , and fit the piping, i am fitting it to the front radiator hope the radiator will not loose air and get hot cos the core size is around 70mm of the intercooler
 
Sheldon

Sheldon

Malta Area Rep.
accent_97 said:
now the only i need find 2 reducers 90 degrees from 60mm to 30mm , and fit the piping, i am fitting it to the front radiator hope the radiator will not loose air and get hot cos the core size is around 70mm of the intercooler
Click to expand...

reducers you can find from lourdess petrol station zabbar..

it wont make much difference ta... my core is around 80mm and covers the whole front end including the rad.. and the rad is smaller than stock (civic rad) without any problems! so should be fine...
 
A

accent_97

Member +
hi guys i need some help turbo is very close to the intake manifold about 2 inches ,lag comes in every moment every time when hiting the pedal gas so if fitting the piping i have to wait 10 sec before the lag comes so i was thinking made an intercooled sucksion i mean one part of the intercooler connected to the turbo that sucks air and the other part to the air cleaner and the lag remain the same +cold air what do you think about it ? or this is a bad idea
 
Last edited:
Sheldon

Sheldon

Malta Area Rep.
ma nafx fimc sewwa imma nispera li le lol...

naha ta lintercooler min fejn it turbo jigbed.. u in naha lohra twahal filter!?!? jekk hekk rit tfisser... LE! tamiliex.. lol u xlag andek? kemm qed itija boost u ma kemm full boost?
 
A

accent_97

Member +
turbo ha nhali li fija l istandard jibustja min 8 sa 15psi max imma bhala boost xi 12 psi ha ntija alissa ax kelli il problemi diga irapurtawni habba iduhan lil adt ax kinet xi 1 bar full boost qabel alura ha ntija 12psi bhala pipe ha jkun 50mm hxuna li jikber al 60mm , jiena qed nahseb li it turbo ha jbati biex itela dik il lag gol intake manidfold tinsiex it turbo tijaj qijad in naha ta wara u ha jkolli naqa tull mhux hazin ara tal glanza qijad fuq quddiem it turbo
 
Sheldon

Sheldon

Malta Area Rep.
yahseb li ha jitlef habba lintercooler? ule man mux ha jitlef daqsek... andi intercooler qisu fridge jiena gifiri mux easy biex jimlieh.. issa int bil 15 qijad ee.. u ghal liem qed tghid? tal fabrika turbo jew dak li kont sa twahal? jekk tal fabrika iktar wiktar ghax mux gbir wisq..
 
A

accent_97

Member +
mela ara fimtekx sew habib bhala sistema trid tigi xa haga ek bhal tal picture? jew kif atlek jiena ? jekk bhal tal picture nahseb li bit turbo tal fabrika andu jahdem sew nasumi?

2714.jpg
 
Last edited:
Sheldon

Sheldon

Malta Area Rep.
memx alfejn dik il hxuna ta pipijiet imma nahseb ee...

mit turbo ghal go lintercooler u min naha lohra ta lintercooler ghal go linlet tal magna.
 
A

accent_97

Member +
peress li jiena min naha tal iklin flahar irnexili insib elbows and wihed il hamrun id ditta mocal colour blue 35 euro each jiswew ima jidru serji bhala materjal u nahseb ha nordna oil cooler ukoll xi 230 euro jigi bil plate pipijiet u il cooler komplut b kollox
 
Sheldon

Sheldon

Malta Area Rep.
accent_97 said:
peress li jiena min naha tal iklin flahar irnexili insib elbows and wihed il hamrun id ditta mocal colour blue 35 euro each jiswew ima jidru serji bhala materjal u nahseb ha nordna oil cooler ukoll xi 230 euro jigi bil plate pipijiet u il cooler komplut b kollox
Click to expand...

min naha tana mela gorg. jkollok temperatura olja taz zejt qijad? tinsiex li issa gejja xitwa.. u jekk tuzaha ghal kuljum u l-oil cooler ma fiehx thermostat hazin tibqa biz zejt kiesah
 
A

accent_97

Member +
nahseb ahjar nerhilu ax andek punt fuq din nahseb turbo bit t series ha narma ax meta qlajtu bara it turbo il housing ma stajtx intawarilu kollox bicca wahda gi ,meta pogejtu hdejh fih tlett darbit daqsu bhala size , it turbo t3 li andi qijad 42 a/r andek ideja x boost itela?
 
You must log in or register to reply here.
Top