I have heard the high-lo button still works with the hks actuator, but i have a question.
Now standard you are looking at what, 6.5psi on low boost and 9.5 on high, so a diff of 3psi.
I want to run about 10-11psi in high boost. So, does this mean i set the actuator to about 7 or 8psi, and then when i hit the high boost button i get 10-11, OR do i set the actuator to 10-11 and that gives 7-8 in low boost?
Cheers;
Harvey
Now standard you are looking at what, 6.5psi on low boost and 9.5 on high, so a diff of 3psi.
I want to run about 10-11psi in high boost. So, does this mean i set the actuator to about 7 or 8psi, and then when i hit the high boost button i get 10-11, OR do i set the actuator to 10-11 and that gives 7-8 in low boost?
Cheers;
Harvey