HKS FCD + Apexi SAFC

[alfradio]

Both the HKS FCD and the Apexi SAFC tap into the wire which is connected to
read pressure... My question is this: "If BOTH items are used, should any
SPECIAL wiring be required? or simply snip the 'pressure wire' and tie both
yellow wires to the ECU side (OUTPUT) and both white wires to the other side
(INPUT)"

alf :homer:

 

[glanzanut]

Both the HKS FCD and the Apexi SAFC tap into the wire which is connected to
read pressure... My question is this: "If BOTH items are used, should any
SPECIAL wiring be required? or simply snip the 'pressure wire' and tie both
yellow wires to the ECU side (OUTPUT) and both white wires to the other side
(INPUT)"

alf :homer:

with the safc set up properly you shouldnt need the fcd alfradio my friend. there was a thread on this last week where the topic was discussed in lenth and this was the outcome from that discussion. hope that helps :freddy:

 

[TomS]

Here you go Alf, according to this you dont need a fcd or a rrfpr if you have an safc properly set up.

I'm thinking about trying it myself although i will be fitting a fpr just to be safe :homer:

http://www.toyotagtturbo.com/forums/showthread.php?t=42241

 

[alfradio]

THANK YOU VERY MUCH!!!!

That was the thread I was looking for but couldn't find!

Thanks!


alf :homer: