How i remove my front discs?

[VXR230BHP]

Hi...as above lads can anyone give me a quick run down on it.

 

[Jay]

Remove wheel.
Remove caliper.
Remove pads.
Remove disc.

If it doesn't comply hit it with a hammer. lol

 

[GT-TD04]

Remove wheel.
Remove caliper.
Remove pads.
Remove disc.

If it doesn't comply hit it with a hammer. lol

You should try jacking the car up first,i found it much harder with it on the ground:haha:

And dont let the caliper hang freely,tie it up once disconnected

 

[Jay]

He said quick. I gave him quick. :haha:

 

[addz]

You should try jacking the car up first,i found it much harder with it on the ground:haha:

And dont let the caliper hang freely,tie it up once disconnected

Don't forget to park the car and apply handbrake

Theres a tutorial somewhere isn't there.

 

[Franza1]

Oh so may holes in this tutorial

what i found always helps too, is if you can find a bolt that will fit in the threaded hole on the disc, it's always how i have taken off mine, by far the easiest way

 

[steo800]

dont forget to remove the caliper bracket after removing pads and caliper, from memory, disc wont come out with this

wheel - 4 nuts
caliper - 2 bolts
caliper bracket - 2 bolts

then get the hammer out, give a few persuasive taps, then turn disc one quarter and hit again a few times, turn a quarter......

 

[JasonGlanza]

http://www.toyotagtturbo.com/forums/showthread.php?t=62 could help you out bud!

 

[Shib786]

ive never had to hit a disc to come off...and i work at a garage every day lol...my glanza is on the ramp right now