How many Psi of boost??

E

enano

Fresh Recruit
Hi,

I have a Stock Glanza V 1.3, i'd like to know how many Psi boost does it have when you drive it in 'Low Boost' and 'High Boost' mode.

And also how can I increase the Psi ?? what's the max limit?

thanks!!

:ep91:
 
M

Mike@TD.co.uk

Registered Trader <a href="http://www.Tuning
Normal high boost is 0.65bar I believe, can up this to around 0.75bar safely but would still recommend uprating the manifold and intercooler if going for more power
 
Suspected_Psycho

Suspected_Psycho

Member +
To answer your question properly:

High is 0.6 BAR IS 8.70 psi

Low is 0.45 Bar IS 6.53 psi

Well i think it is!.. its been a while since ive run std boost! :)

11.60 will just be under fuel cut on std ECU, also its recomended that you only run 0.8bar max on the stock manifold.
 
Last edited:
Blak_Mamber

Blak_Mamber

Member +
You will need an adjustable actuator to up the boost (HKS etc) but the car will hit fuel cut when upping the boost so either a Fuel Cut Defender (FCD) or piggy back ecu will stop this.... But you will need supporting mods for fuel, cooling, air etc..
Do a search mate as there is way too much info on this topic on the site :D
Hope this helps a little
 
Jay

Jay

Admin
In standard mode and untampered with:



High Mode

Runs .65 bar of boost offering 135ps @ 6,400rpm and 16.0kg-m of torque.

Lo Mode

Runs .40 bar of boost offering 115ps @ 6,400rpm and 14.8kg-m of torque.


Cheers,

Jay



(All figures taken from the original Toyota showroom brochures)
 
You must log in or register to reply here.
Top