Mk1 GT Grille

Discussion in 'Jay's EP82 Spares' started by Jay, Sep 17, 2018.

  1. Jay

    Jay Admin

    Imported a mk1 GT (EP82) grille in as we are getting thin on parts locally. Bit of wear on the badge and will need some fresh paint but otherwise everything is undamaged, mounting points are all present and correct. In good condition for age and hard to find these days.

    £90 plus post.



    Calum122 likes this.
  2. dac69er

    dac69er Super Moderator

    do the screws undo that hold the badge on? i may be interested if they do......
  3. Jay

    Jay Admin

    Yep, the badge is held on with a screw or two. I'll doublecheck theres no issues and report back Duncan.
  4. SKINY

    SKINY Registered User +

    1 screw and 2 stud like bits in my MK3 badge
    If you do buy it dac69er and want to refurb the badge acetone will take the old paint off, careful to keep it to the GT bit just as it will remove ALL the badge paint, check my thread :)
  5. dac69er

    dac69er Super Moderator

    i refurbed the badge on one of my MK1s this year.

    i just covered the front of the badge with masking tape. sanded the masking tape off on the raised 'GT' bit, then sprayed it. turned out pretty good tbh.

    would have been easier if i could have got the badge off rather than doing it on the grille.
    SKINY likes this.

Share This Page