need clutch info

[Harvey]

Ok, thanks for your imput everybody, we're getting somewhere I think!

Anyone can confirm if the 86 to 89 MR2 flywheel also fits? (it has 8 3/8 holes?)

99% certain the flywheel will NOT fit.

 

[NORTHERNEP82]

99% certain the flywheel will NOT fit.

What about Paseo or Tercel ones?

 

[Agod]

How is clamping force measured?

What is the correct clamping force for an EP91?

 

[Agod]

Along my googling way i found out this:

EP82/EP91 Starlet 4E-FTE 1989~1999 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

AW11 MR2 (N/A) 4A-GE 1985.6~1989.10 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

AW11 MR2 (S/C) 4A-GZE 1986.6~1989.10 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

 

[Agod]

Maybe sam (speedvision) would be kind enough to correct the above for me. Cause from my understanding the mr2 has same size + clamping force.

Is this a mistake in the site i found?

 

[NDR008]

I am not sure, but I believe all E- sries clutches will fit, flywheel not 100% sure.

 

[NORTHERNEP82]

Along my googling way i found out this:

EP82/EP91 Starlet 4E-FTE 1989~1999 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

AW11 MR2 (N/A) 4A-GE 1985.6~1989.10 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

AW11 MR2 (S/C) 4A-GZE 1986.6~1989.10 (215mm DISC, Clamping Force 6900Nm(700kgf/m)

Very interesting data...could those be exactly the same?

 

[ChrisGT]

I think they are exactly the same mate.

 

[NORTHERNEP82]

Are the flywheels the same also?
Might get a kit with a lightweight one while I'm at it...

 

[NORTHERNEP82]

Oooops...just found this:

Application

Make: Toyota
Model: MR2
Year: 1988, 1989
Engine: 1.6L
Note: Supercharged, 4AGZE Engine





Clutch Specs

Part No: 16-075
Disc OD: 9 1/4
Disc Spline Diameter: 1 1/8
Disc No. of Teeth: 21



The splinediametre won't fit; it sems that ours is only 1 inch.
The outside diametre is also too large...
So the Supercharged Mr2 clutch won't fit

 

[Harvey]

I dont know where you got that info from mate but its wrong.

For a start the 86/7 on MR2 NA and starlet clutch is 212mm not 215.

And the big one, the SC does NOT use the same clutch.

The SC uses an E series gearbox, essentially an mr2 turbo gearbox with a 4AGE bellhousing. It is 224mm IIRC and yes the splines will probably be different as its for an E series box not C

 

[NORTHERNEP82]

Just found a list of Toyota clutches and here's the ones that have the same diametre and pressure rating:

Vitz NCP13 00.10 ~
Vitz NCP15 99.10 ~
Corolla 2 EL31(Turbo Charger) 86.9~ 90.8
Corolla AE91,92 89.5 ~ 92.4
Corolla AE101 91.6 ~ 95.4
Corolla AE110 95.5 ~
Corolla AE111 (6MT/5MT) 95.5 ~
Corrola Runx / Alex NZE121,124 01.1 ~
Corrola Runx / Alex ZZE123 01.1 ~
Corrola Wagon AE111 (6MT/5MT) 91.6 ~
Cellica ( Front Wheel drive) ZZT23# 99.9 ~
Carina AT21# 96.8 ~
MR2 AW11 (NA) 85.6~ 89.10

Would all those fit?

 

[cneculae]

Yeah, I read somewhere that a 1986 to 1989 MR2 clutch could fit.
Anyone can confirm if it's N/A or supercharged?
(or are they both the same?)

That Is exactly true I used a 1986 Mr2 clutch and it was a perfect fit