Johnny_C
Lifer
Last edited:
NI MEET. sat 30 Jan(this sat)
- Thread starter Phil
- Start date
ryanpatterson
Fresh Recruit
Will edit this when the rest of them download..
Last edited:
ryanpatterson
Fresh Recruit
Thats all the decent ones i have. Only remembered about takin pictures when Spuddys car was on lol
ryanpatterson
Fresh Recruit
Ah crap.. Did not realise. I can take them down again if you want. Its already taken me until now to download them all!!!! lol
A
Animal GT
Guest
any figures lads??
spuddy
Ulster Area Rep.
Phils going to email me the RR chart for my car, we where only testing and setting up the nitrous though so we only ran 0.8bar with and without the gas for a comparison.
Then did 1 run at 1.4 bar for the spectators
Overall I'm very very very impressed with nitrous on a turbo car. Normally my turbo kicks in at 5000rpm, you'll see on the chart when we get it up, chris hits the button at 3000rpm, by 3200rpm we have full boost
Then did 1 run at 1.4 bar for the spectators
Overall I'm very very very impressed with nitrous on a turbo car. Normally my turbo kicks in at 5000rpm, you'll see on the chart when we get it up, chris hits the button at 3000rpm, by 3200rpm we have full boost
spuddy
Ulster Area Rep.
Was there any video taken today? Thought I saw a video camera up there today, would like to see some of the flames coming out the back after the nos runs.
Figures from today are
0.8 bar without nitrous 225hp
0.8 bar with nitrous 267hp
1.4bar witout nitrous 315hp
So hopefully at 1.5 which runs 320hp +the 40hp from the nitrous the car should be around 360hp. We didn't do a full boost nitrous run cause we didn't have faith in the headbolts keeping the head on the block.
Figures from today are
0.8 bar without nitrous 225hp
0.8 bar with nitrous 267hp
1.4bar witout nitrous 315hp
So hopefully at 1.5 which runs 320hp +the 40hp from the nitrous the car should be around 360hp. We didn't do a full boost nitrous run cause we didn't have faith in the headbolts keeping the head on the block.
Last edited:
pilgrim_fgau
Member +
good result =]
D3N0
Member +
Great results there Spuddy, maybe next week ill get my machined mapped. id be happy to get them results as you have.
i'd thought you had ARP headbolts? or is that in the pipeline.
spuddy
Ulster Area Rep.
They're in the back of the car somewhere, I just haven't been arsed to fit them I need a good :slap:
I need them in for next saturday, I think we are going for the proper 2010 race mapping session at ECC next Saturday. From the info Chris and myself have gathered over the months its looking like the car will surpase our expectations. 400+ here we come
The results are ok but u really need to see the Dyno sheet to see exactly how it responds to the nitrous.
Last edited:
ryanpatterson
Fresh Recruit
Yea i took a few videos of your run. But they are to big to upload. I could maybe email to you if you want?
jjayokocha
Ulster Area Rep
Excellent result Spuddy.
spuddy
Ulster Area Rep.
Aye email them on to me, garethhut@hotmail.com
You might only be able to send one at a time via email, think hotmail has a 10meg limit.
jjayokocha
Ulster Area Rep
Can the vids not be compressed to an rar file and then sent by email? saves a lot of space.
spuddy
Ulster Area Rep.
Possibly, depends I guess on the video format.
