not enough power

C

CaL

Guest
lol i said this....you need these parts really for better results...rx7 tmic...proper decat....setup.....shoudl cost around£200-£300 buy will be worth it for the extra bhp
 

MJA

Member +
that Torque figure is very good, there's something not right about that power figure though. Ben gt's made 125 ish a few weeks ago, and it was completely standard!
 

Chris@CCM

Member +
mate i would get it mapped properly to make the most of the ecu...the ecu could be making the car run rich or lean so drastically loosing power...you SHOULD see 150-160 bhp from that set up....get it mapped matey.... mate btw too bget a proper decat....gutting your cat wont be as effective as a decat....that will ease power a bit
from what i hear jam are the only ppl that can map there ecus so i cant see him being able to get it remaped .as golden says that a v v good torque figure
 

Monkfish

Member +
that Torque figure is very good, there's something not right about that power figure though.

Deffo something funny going on there...

Mine made 179bhp and 152 lbs.ft on a CT9a :confused:

You've not got the figures mixed up have you? (As in 137lbs.ft and 165.7bhp) :D
 

GT-TD04

Supermoderator
Deffo something funny going on there...

Mine made 179bhp and 152 lbs.ft on a CT9a :confused:

You've not got the figures mixed up have you? (As in 137lbs.ft and 165.7bhp) :D

LOL i wish,no looking at the sheet now.definatley the right figures
 

99glanzav

Banned
:D:D im feeling a bit better
but torque is nothing without power,should of got martin to check your fuelling though,although id say it maybe the fact that its 15years old and maybe had a hard life?im sure if you was overfuelling alot he would of told you:rolleyes:
 

GT-TD04

Supermoderator
but torque is nothing without power,should of got martin to check your fuelling though,although id say it maybe the fact that its 15years old and maybe had a hard life?im sure if you was overfuelling alot he would of told you:rolleyes:

I don't abuse the car but i cant speak for the old owner,but he did have it regulary serviced,same as me every5k,was due 200kph ago :(
i know,when iget the fmic and decat and boost 1bar i'm going back to martin to check before remapping.
i know i need power with tourque (yesterday an ITR eat me,was v.quick though:eek:)so i want the 170bhp and hopefully more tourque
 

maj

Member +
seems a rather low i got 134bhp and 165 lb with my rr and mine was standard except for an exhaust and that was with powerstation so a good company. i would get a mapping session on the rr
 

Adam_Glanza

Member +
lol! look at cal giving it all the big man talk like he knows what hes on about.. if you even have a clue what your on about you would realise jam ecus cant be remapped like a normal ecu. only jam themselves can do it. fool
 

ragz

Member +
I don't abuse the car but i cant speak for the old owner,but he did have it regulary serviced,same as me every5k,was due 200kph ago :(
i know,when iget the fmic and decat and boost 1bar i'm going back to martin to check before remapping.
i know i need power with tourque (yesterday an ITR eat me,was v.quick though:eek:)so i want the 170bhp and hopefully more tourque

send that integra type r this way ill show him
 

GT-TD04

Supermoderator
Right was checking my plugs today and noticed that my second plug from the right was up by about an inch so i pushed it back down.
Went for a drive and soon after it seemed like i lost power(not a whole lot but noticable) so I checked them again when i opened the bonnet and it was back up so i now have it held down with a piece of cardboard between the tmic and plug.
Maybe this is why the poor results as it would hiccup a bit sometimes.
Ideas???
 

Dan3SGTE

Member +
funnily enough i checked my plugs today and my plug was also raised lol.....that would definitely cause loss of power if its not properly sparking BUT then again it would missfire if a plug was out...............
 

GT-TD04

Supermoderator
used to miss fire just when the turbo spooled up,on and off,really just when it was boosting at 12.5 (the highest mine goes)
 

starbogt

Member +
I made 132bhp and 152lbft @ 1 bar so think yourself lucky :D I was told the timing needed re adjusting but didn't have a standard figure to work from at the time. Was your figure after being setup on rolling road fueling and timing?
 
Top