oil pressure sensor

[turbominicooper]

best place to plumb sensor /take reading for oil pressure gauge?

 

[weeJohn]

Where the stock oil pressure switch is mounted to the block, use a tee piece.

 

[STARLET N/A]

I would get a sandwich plate, herd some bad things about the to t-piece snapping because you two sensors that are attatched to it.

with sandwich plate you can also put in a temp gauge if you want.

 

[turbominicooper]

Where the stock oil pressure switch is mounted to the block, use a tee piece.

can i get a link to an image showing where it is please?

 

[turbominicooper]

I would get a sandwich plate, herd some bad things about the to t-piece snapping because you two sensors that are attatched to it.

with sandwich plate you can also put in a temp gauge if you want.

sounds like a good idea, is it literally called a sandwich plate??

 

[WallaceGlanza]

With the sandwich plate you'll likely need to grind a section of the power steering pump bracket to give enough clearance.

 

[turbominicooper]

With the sandwich plate you'll likely need to grind a section of the power steering pump bracket to give enough clearance.

sod that then, can someone give me a quick description of where the standard oil pressure sensor is - front, back?

 

[AdamB]

On the front of the block, just to the right hand side of the exhaust manifold. Single wire sensor.

 

[turbominicooper]

On the front of the block, just to the right hand side of the exhaust manifold. Single wire sensor.

cheers mate

 

[weeJohn]

Search for it mate, loads of pics and info posted.

 

[bongskag]

http://www.toyotagtturbo.com/forums/showthread.php?82517-Thread-size-of-oil-pressure-switch-4efte