put mine on the rollers today :)

[amy ep91]

no 1 said you wer lying bout the mods - just that that dyno reading dusnt seem right - different dyno's give different readings and it also depends if they wet on "customer satisfaction mode" lol

its just the way he put it that came across that way.
im going to check tonight that it defo is running at 0.6 but it was the last time i checked and i havent touched it since.
but it was my bf that done it so i dont think the "customer satisfaction mode" was applicable lol

 

[Dan3SGTE]

Amy,

Sorry if thats how it sounded, but i can assure you that i didnt mean that. I can seem quite blunt sometimes.

Like said, all im implying is that the dyno sounds to be giving an inaccurate reading as 160+BHP(flywheel) CT9 @ stock boost and your A/F isnt even set up to run 0.6bar.........

On a custom map on a fully mappable ECU i might have been a little more convinced but even then, sceptical.... Nothing ads up to much.

On that note, im sure you love it and your more then happy with the way it drives but this thread is going to draw opinions as it is about what power you made on a dyno after all.

Its showing 165BHP. Thats around what it should make @ 0.8BAR and set up!

 

[gv1.3]

Agree with Dan on this. My car running a ct9 with fmic, filter, rrfpr and fcd with boosting at .9 - 1bar made the same power as your dyno printout. I would find it difficult to figure out how a ct9 at .6 bar can produce the result yours did... maybe its had some work done to it that you dont know about or else the dyno is not very accurate.

Dyno figures mean very little anyway, its how the car feels when you drive it. I love the spool up of the CT9 it comes on boost so quickly its like a videogame

 

[amy ep91]

well like i said, im going to check that its still on 0.6, which i should be as i havent turned it up, so unless my boyfriend or dad turned it up without me knowing i dont know, but i doubt they would as im fairly protective of my car.

but i will check and if its still at 0.6 then i dont know what it could be because i know i havent done anything to it, and like you said there could have been stuff done to it that i dont know of.
but i dont know.

i'll update once i havent checked.

but yeahh im happy with it, and yeah it does feel very quick to drive and when it makes all its noises im like gahhhhh

 

[williamocarroll1982]

As long as your happy with how it drives then thats all that matter. Power figures are only for penis measuring anyway and since i doubt you have one........ I guess it doesn't apply :haha:

 

[amy ep91]

well it's been a while since i said i would update once i know what it was on.
well ive had internet troubles but im back now
but basically daddy turned it up to 0.7 ....

now that's 100% no word of a lie so you can say what you like now

 

[GaryGT]

well it's been a while since i said i would update once i know what it was on.
well ive had internet troubles but im back now
but basically daddy turned it up to 0.7 ....

now that's 100% no word of a lie so you can say what you like now

awh bless him isnt daddy great
lol
will ya stop 140WHP or 160WHP with ur spec is dreaming babe
but a great way to start a arguement amongst fellow GT heads ;-)
U Go Girl ;-)

 

[amy ep91]

i wasn't starting an arguement lol i got a few things mixed up because they wasn't explained properly haha
and it really was 140 at the wheels
i don't understand why no one believes that !!

 

[the bullet]

gud result wat mods ya got done to it ???

 

[Tanz]

i wasn't starting an arguement lol i got a few things mixed up because they wasn't explained properly haha
and it really was 140 at the wheels
i don't understand why no one believes that !!

its okay to get a few things mixed up we all do on occasion,,and as for no one believing you ,,its not that they are doubting your word its just they are doubting those figures with the set up you have is all...

 

[amy ep91]

well there us defo nothing wrong with the rollers as its a proper place that many race cars use and they have all the proper equipment and stuff. so i dont know, like someone said before, maybe the previous owner done something to it that i don't know about. :S

 

[johnny_k]

Hybrid ct9 perhaps?

 

[amy ep91]

Hybrid ct9 perhaps?

this is correct

 

[GaryGT]

best of luck with the car hope it runs well for ya

 

[amy ep91]

best of luck with the car hope it runs well for ya

thank you