GT_Irl
Member +
Went to see Daniel P's ep70 here in Brisbane this afternoon to see if I could help him out with some of the issues on his car...I wasnt much help lol! Anyway heres some photos and a few questions below for the teckheads on here!
Spec:
Forged 5e
TD04/Mani/Decat
Haltech ECU
Standard injectors
Boosting 0.5 bar at the moment
Frontmount
Relocated filter
Coilpack
3 bar map sensor
Issues he is having:
(1) Speedo not working
(2) Rev counter not working
(3) rough (ish) idle
(4) leaking oil return line
(5) Rad constantly on
(6) bogs down going uphill and occasionally (possible overfueling?)
Anyway he plans to make it into a track car and he has a really good base already, juts need to sort out these issues.
Should there be connectors on these in the photo above?
This is the braided line that is leaking. Can anybody suggest an alternative route for this line to reduce stress on it?
What are these for? Where should they go?
This tube ok? Seems to go from front of inlet mani to back??
This is the wiring around the rad/switch. Can anyone suggest where the plug might be if the aircon was removed? (the one to bridge)
Thanks peeps...rep for more info!
Spec:
Forged 5e
TD04/Mani/Decat
Haltech ECU
Standard injectors
Boosting 0.5 bar at the moment
Frontmount
Relocated filter
Coilpack
3 bar map sensor
Issues he is having:
(1) Speedo not working
(2) Rev counter not working
(3) rough (ish) idle
(4) leaking oil return line
(5) Rad constantly on
(6) bogs down going uphill and occasionally (possible overfueling?)
Anyway he plans to make it into a track car and he has a really good base already, juts need to sort out these issues.
Should there be connectors on these in the photo above?
This is the braided line that is leaking. Can anybody suggest an alternative route for this line to reduce stress on it?
What are these for? Where should they go?
This tube ok? Seems to go from front of inlet mani to back??
This is the wiring around the rad/switch. Can anyone suggest where the plug might be if the aircon was removed? (the one to bridge)
Thanks peeps...rep for more info!