ryan_v
Lifer
I took the glanza up for a mot retest last nite after failing on the foot pedal for the rear brakes there is a inbalance of 59% to the rear left.
Things I done before the retest:
Calipers off and the pistons move freely on both side.
Sanded the discs down and pads
Copper greased the back of the pads
Checked the handbrake cables and there free
Took it for a drive and pumped the brake pedal then adjusted the handbrake
The only thing that I noticed wrong was the handbrake was adjusted wrong. It was screwed on a little bit. The only thing I didnt do was bleed them.
Does anyone have any ideas what could be wrong?
Things I done before the retest:
Calipers off and the pistons move freely on both side.
Sanded the discs down and pads
Copper greased the back of the pads
Checked the handbrake cables and there free
Took it for a drive and pumped the brake pedal then adjusted the handbrake
The only thing that I noticed wrong was the handbrake was adjusted wrong. It was screwed on a little bit. The only thing I didnt do was bleed them.
Does anyone have any ideas what could be wrong?