relocation air feed, sizes needed

ChrisGT

ChrisGT

Member +
durmz said:
i got mine ported all way through, from the inlet on it shaped and al the rest like, i only fitted a decat, made it creep like mad, it did help that, but if i get a relocation kit too will this most likely be too much and make it creep again?
Click to expand...

What do you mean by ported all the way through? Shaped? Like, so the diameter of the hole increases the further in you go ?
 
T

Toby@ToyTuning.com

Banned - DO NOT BUY FROM TOYTUNING
Yeah mate check out the "more info" bit on you tube:


This is our demo car no two, built to show you that you don't need 300hp + to build a track monster Starlet! Power to ground is at maximum potential making it a fantastic fast road car capable of outhandling pretty much most of whats out there with FWD ore inspiring confidence, mainly down to 0 lag, instant response and a very well balanced chassis.

If you want your Starlet to be like this then contact us today!

www.toytuning.com

Spec:

Toy Tuning CT9 Hybrid
Toy Tuning CT9 Actuator
Toy Tuning Filter Relocation Kit
Toy Tuning CT9 Manifold
Toy Tuning 4 Pot Big Brake Kit
Cusco 12 Point Cage Saftey21 / Stripped out apart from dash
Whiteline Front + Rear ARB's with Urethane links and D Bushes
Whiteline Panhard Rod
Whiteline Antilift Kit
Ultra Racing Front Lower Arm Bar
Ultra Racing Rear Lower Arm Bar
Front and Rear Braces
Toy Tuning Engine Mounts
TRD Lower Arm Bushes
TRD Rear Suspension Arm Bushes
Toyo 888 Semi Slicks in Soft Compund

+ more!!
 
durmz

durmz

Member +
montanajr said:
What do you mean by ported all the way through? Shaped? Like, so the diameter of the hole increases the further in you go ?
Click to expand...

tbh im not sure, mr d.burwash did it while darren was replacing me clutch, said something about shaping the whole wastegate to the exit, makes it flow better. it still wants to creep a tiny tiny bit when its cold though, think i might wait til ive got everything i need to run a bar then it shudnt be a problem should it?
 
durmz

durmz

Member +
Toby@ToyTuning.com said:
Yeah mate check out the "more info" bit on you tube:


This is our demo car no two, built to show you that you don't need 300hp + to build a track monster Starlet! Power to ground is at maximum potential making it a fantastic fast road car capable of outhandling pretty much most of whats out there with FWD ore inspiring confidence, mainly down to 0 lag, instant response and a very well balanced chassis.

If you want your Starlet to be like this then contact us today!

www.toytuning.com

Spec:

Toy Tuning CT9 Hybrid
Toy Tuning CT9 Actuator
Toy Tuning Filter Relocation Kit
Toy Tuning CT9 Manifold
Toy Tuning 4 Pot Big Brake Kit
Cusco 12 Point Cage Saftey21 / Stripped out apart from dash
Whiteline Front + Rear ARB's with Urethane links and D Bushes
Whiteline Panhard Rod
Whiteline Antilift Kit
Ultra Racing Front Lower Arm Bar
Ultra Racing Rear Lower Arm Bar
Front and Rear Braces
Toy Tuning Engine Mounts
TRD Lower Arm Bushes
TRD Rear Suspension Arm Bushes
Toyo 888 Semi Slicks in Soft Compund

+ more!!
Click to expand...

that is awesome, any more vids of it about?
 
ChrisGT

ChrisGT

Member +
durmz said:
tbh im not sure, mr d.burwash did it while darren was replacing me clutch, said something about shaping the whole wastegate to the exit, makes it flow better. it still wants to creep a tiny tiny bit when its cold though, think i might wait til ive got everything i need to run a bar then it shudnt be a problem should it?
Click to expand...

Oh ok, he ported it so the diameter of the wastegate hole goes from large to smaller, so the gases flow better and exit. Makes sense!

Has it helped a lot to stabilise boost? I'm very tempted to do it..I'm at home Fri/Sat/Sun so might attempt it tomorrow/Sat! lol
 
durmz

durmz

Member +
u got me flicking through the youtube clips u got on there now lol, think i may have caused a thread hijacking...woops, soz dude, thanks for the help anyways, within the next year, ule prob have me ringing u up with a bank loan asking for you to build me sumthin like that demo car hahaha :p
 
davehart

davehart

Member +
So, when I want my CT9 Hybrid setup doing in the summer how much does a TT service for it all cost?

I dont fancy installing it and setting it up myself.

On a side note to that, are there any re-location kits that fit with the aircon still installed?
 
durmz

durmz

Member +
montanajr said:
Oh ok, he ported it so the diameter of the wastegate hole goes from large to smaller, so the gases flow better and exit. Makes sense!

Has it helped a lot to stabilise boost? I'm very tempted to do it..I'm at home Fri/Sat/Sun so might attempt it tomorrow/Sat! lol
Click to expand...

yeh it did a bit, not as much as i was hoping, but it sounds like everyone has different results with these things, dave said he didnt go mad on mine coz it was cracked
 
T

Toby@ToyTuning.com

Banned - DO NOT BUY FROM TOYTUNING
Around a circuit or in a straight line? :beer:

What spec are you running? it didn't have me behind the wheel and if it was in a straight line get your ticket back to the States it's not a powerful car for freeway racing :p

T
 
Last edited:
A

argylefan1985

Member +
on a private 8mile road there and back, few light bends and corners etc but its a fast road

ask peen himself, and if ur in disbelife he will tell u.

and i cant be assed to put my spec up again lol
 
Last edited:
You must log in or register to reply here.
Top