Standard Front Starlet GT Turbo seats

[Gav VZR]

I was just wondering would front Starlet GT Turbo seats from a 95 model bolt straight into my 96 Glanza V Turbo?

 

[Jay]

Might need a little assistance with a pry bar but they should go in easily enough mate. There's also a locating pin on one of the front mounts that'll need removed if I remember correctly.

Jay

 

[Gav VZR]

Might need a little assistance with a pry bar but they should go in easily enough mate. There's also a locating pin on one of the front mounts that'll need removed if I remember correctly.

Jay

I got the seats the other day and went to put them in today and discovered they didn't fit, 3 brackets on each line up ok but 1 bracket at the front on each seat doesn't line up to the holes so i have to get a mate of mine that does custom metal work to weld some brackets on that'll fit

 

[Jay]

There should be plenty of flex if you put the three bolts in halfway and use a pry bar to get the last one in position. I've done quite a few of these, some line up fine and others need persuasion.

Jay

 

[Gav VZR]

There should be plenty of flex if you put the three bolts in halfway and use a pry bar to get the last one in position. I've done quite a few of these, some line up fine and others need persuasion.

Jay

But if you force them into place with a pry bar would that not bend the rails and make the seats not slide back and forth smoothly?