[TD04/5/6 turbo owner list] setups, performances, pics...

Fishy89GT

Fishy89GT

Banned
justsumguy said:
Shouldve just gotten a td05 turbine wheel and just bore out the td04. Ima end up doing that but damn nobody has tried to reach the 300s in td04? Hopefully the seals hold when i boost bar and a half.
Peace
JP
Click to expand...

1.5 bar will be fine...yes but ive got a HRF kit now which is lush lol...also i wanna go td06 and its alot easier if you already have the right flange, and dont have to mess around boreing it out lol..you could easily get 300hp on a td04 with racefuel imo.
 
F

fur

Member +
mine is

5efhe motor / MHI evo 6.5 tommi mak TD05-hra / custom equal length exhaust manifold / evo 6.5 downpipe / custom 3 inch exhuast with resonator / forge motorsport FMIC with 2.25" aluminium charged pipes / hks super sequential blow off valve / tial 38 mm wastegate with screamer pipe / 9:1 cp racing pistons / ported and polished head / 5efhe cams / trd plug leads / act extreme clutch / aasco 8lbs aluminium flywheel / apexi avcr electronic boost controller / greddy emanage ultimate / acis intake manifold

can't remember anything else off the top of my head, will try to get some figures soon :)
 
J

justsumguy

Member +
Fishy89GT said:
1.5 bar will be fine...yes but ive got a HRF kit now which is lush lol...also i wanna go td06 and its alot easier if you already have the right flange, and dont have to mess around boreing it out lol..you could easily get 300hp on a td04 with racefuel imo.
Click to expand...

Lovely, and u cant go wrong with a td06. luckily the sonoco over on the west side of miami, aka hialeah, sells race gas. and i work at the airport where i know the fueler, as i have gotten jet fuel before and did a 80/20 mix. 80 being 93 oct.

@gorgan
hybrid with a td05 wheel? but at how much boost.

Peace
JP
 
Idrees

Idrees

Banned
WEPR TD04 Hybrid Turbo / WEPR Stainless Mani + Downpipe / Tial 38mm Wastegate / WEPR Front Mounted Intercooler / Apexi AVCR Boost Controller / Apexi Power FC / Defi White Gauges / HKS SSQV / Sard RRFPR / Blitz NUR Spec Exhaust / Quaiffe LSD / Spec 6 Puk Paddle Clutch / Magnecore 8mm HT Leads / Iridium Spark Plugs / Cusco Catch Can / TD Throttle Pulley / Alu Oil Cap / HKS Rad Cap / Silicone Hoses

219bhp @ the fly and a touch under 200ft/lb torque. 1 bar on stock internals.
 
L

lowresolution

Member +
Here is mine ..not extractly a starlet but the heart is a 4efte

Chassis = Charade GTTi , TD04HL-15t (From a Saab 2.0 ) / Road Runner Manifold / Accel Plug Wires / Front Mount Intercooler (700 MM ) / Blow off Valve / ACT 6 Puck Clutch Kit / Vafc2 / 5efhe Cams / stock injectors / HKS Manual Boost controller / Walbro 255 LPH fuel pump / Timex Oil pressure / temprature gauges / Adjustable FPR / stock engine / Boost = 0.7 bar
 
sx_turbo

sx_turbo

Lifer
wepr hybrid td04 (short runner kit), TIAL external wastegate, 5zigen borderspeed exhaust, k+n air filter, Race ported cylinder head, wossner pistons, PEC con rods,blueprinted bottom end, ACL uprated engine bearings, ATHENA racing head gasket 1.2mm, t-m developments thermal inlet gasket, FSE RACE fuel pressure regulator, GOLPHER 26mm aluminium racing radiator, autobahn silicone hose, autobahn fmic with custom piping, AUTOBAHN oil catch can, HDI boost controller, TIM boost gauge, STACK oil pressure gauge, STACK oil temp gauge, SARD oil sandwhich plate, k+n oil filter, MOCAL 13 row oil cooler, EXEDY 3 paddle racing clutch, APEXI power fc and commander, SARD 550cc injectors, TRD mechanical LSD, WALBRO 255l/h fuel pump, NGK Iridium heat range 8 spark plugs, NGK blue racing leads, ARP headbolts, APEXI 3bar map sensor. Currently running 1.2bar boost with 256bhp@fly, but car is in desperate need of a remap and the boost upped
 
gglavin

gglavin

Member +
Heres mine

WEPR TDO4 hybrid turbo/mani/downpipe/ screamer pipe & Tial ext wastegate on fully forged 5efe, SARD 550cc injectors, FSE FPR,Walbro fuel pump, Greedy e-manange ultimate, Apexi boost controller, Apexi filter ( relocated ) Blitz LM intercooler, HKS silent hi-power exhaust, Exeedy paddle clutch, Greedy oil cooler & catch tank, HKS super racing plugs, powerflex engine mounts Magnecore leads.

mapped in AFR @ 240bhp on 1.0 bar boost & 294bhp @ 1.5 bar boost
 
Last edited:
M

Mikey4410

Member +
Mikey4410 setup/power .....

HUGE J PERFORMANCE FRONT MOUNT,MESHED TD04L TURBO RUNNING 14PSI BOOST,WALBRO 255LTR HOUR FUEL PUMP,EXEDY PADDLE CLUTCH,RISING RATE FUEL PRESSURE REGULATOR,HALFSIZE CIVIC RAD,FCD,TOYOSPORT DECAT AND MANIFOLD,STRAIGHT THROUGH HKS SILENT SYSTEM(just end can only),BAILEY DUMP VALVE,NO POWER STEERING,HEATER MATRIX,SUNROOF,AIRCON OR INTERIOR,15 " ALLOYS WITH MAXXIS TYRES,ENGINE AND
FUELING SET UP ON DYNO. 222.6 bhp and 187 ftlbs on a very warm intercooler. !!
 
babu_rashu

babu_rashu

Member +
mine setup is
wepr hybrid td04 (short runner kit), TIAL external wastegate, nitto heder turbo exhaust, HKS musroom air filter,wischo pistons, ACL uprated engine bearings,1.2mm hed gasket, SARD fuel pressure regulator,autobahn silicone hose, HDI fmic, HKS EVC 4 boost controller, HKS Turbo timer, HKS SSQV, APEXI boost gauge, k&n oil filter, EXEDY paddle racing clutch, Greddy e manage blue, SARD 550cc injectors, WALBRO 255l/h fuel pump, NGK Iridium heat range 7 spark plugs, Harican red racing leads, ARP headbolts, greddy 3bar map sensor,zep engine section dempars, Braided Brake and oil Lines, cusco coilover ,cusco lower arm bar , cusco master cylinder stopper, volk racing rims with 195/50 michelin tires, Currently running 1.1bar boost with 230bhp, but desperate need of a remap and the boost upped
 
W

wastegate

Member +
Sorry of the offtopic guys but i observed that most of you running wepr manifold so they worth they money..
I am asking because i am thinking of buying a manifold..
 
T

turboloon

Member +
can i add my car to this list of td04 owners..spec is wepr td04 kit, stainless steel exhaust,f.m.i.c,civic alloy rad with slim line fan,reloacted air filter blitz sus filter, uprated earthing kit,uprated fuel pump,greddy boost controller,greddy emu (mapped to 1 bar by chris from ccm.)wilwood big brake kit,poly bushed front end with anti lift kit,whiteline panhand rod,orc 309 clutch,uprated suspension.bits i have still to be fitted are rear anti roll bar,quife atb diff,sumo built forged btm end.and then remap.
 
Last edited:
HYBRID

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
Lads,

Iv just pruned this thread off all the excess junk that was added into it over the past 2 days.

Please remember this is the technical section.. the road road section is for discussing/ arguing over the usual pub talk.

If you want to open a thread to argue over his dyno printout, that is up to you, but please DO NOT litter the technical
forum with usless garbage.

Thanks
Kon
 
You must log in or register to reply here.
Top