TD04 Dyno figures

[Exe_GT]

Well i finally completed the TD04 setup and went to check fuelling and power. I am not fitting my Unichip and RRFPR for a few weeks and we found that 0.7bar was safe and a good mix until then. I managed 176.4bhp at the fly so am i right in assuming that at 1 bar i should break the 200bhp mark.

Many thanks

Karl

 

[pc18]

yep thats right you should expect 210-220ish atf at 1 bar

 

[garry goodall]

for reference i made 200bhp atf with the fpr and fcd setup at 1bar, got it mapped and it made 215bhp atf, so i would think that it would easily make over 200hp with 1 bar of boost

 

[danb87]

look forward too seeing the future results dude. i will be havin mine done failry soon not td04 but would like around 200

 

[Gav_Kara]

Mine made 219.7 ATF on 0.8bar boost using a tdo4 wepr kit

 

[steveatyork]

mine made 218bhp@1.1bar.my new plan is to use my tdo4 on my 5e and push it to its limits.im guessing around 270bhp

 

[matt walters]

how much roughly is lost between the fly and wheels?

am i right in saying that if its 220atf itll be about 200 atw?

 

[sx_turbo]

about 15 iirc,

 

[grum-glanza]

anybody have any figures for a 5e with a td04L setup?

 

[AdamB]

how much roughly is lost between the fly and wheels?

am i right in saying that if its 220atf itll be about 200 atw?

Its about 10-15% loss in transmission mate

 

[ianmcintoshi]

I made 176hp @ the wheels at 0.9bar on a td04 using a unichip aswell. Roughly 207 @ the fly i think.