teg wheels

D

Duggy

Member +
hey guys always loved dc2 wheels and as they are 15 " could i use them or stud pattern differnt can get a set cheap and wanted a spare set anyway
 
dac69er

dac69er

Super Moderator
they are 5 stud for a start so in a word, no. would be easier to just find some similar wheels with the same stud pattern as a starlet
 
Texx

Texx

Super Moderator
4 stud DC2 wheels are 4x100 and will bolt straight onto a Starlet, however the centre bore is larger than the Starlet hub so spigot rings will be required.
 
WallaceGlanza

WallaceGlanza

Member +
Texx said:
4 stud DC2 wheels are 4x100 and will bolt straight onto a Starlet, however the centre bore is larger than the Starlet hub so spigot rings will be required.
Click to expand...

Pretty sure as Ryan said that they're 114.3 PCD on the DC2's (Type R's) the Si's and other DC2's are 4 x100 apparently.

Also I don't think you need spigots on any wheels aslong as they have tapered wheel nuts and seats - as they will centre the wheels same as the spigots do. Neither sets of my wheels have spigots.
 
Last edited:
Texx

Texx

Super Moderator
The 5 stud Type R are 5x114, the 4 stud Type R might be 4x114, but the remaining 4 stud DC2's are 4x100. I've got a set of 17's from a DC2 that I've used on the GT.
 
WallaceGlanza

WallaceGlanza

Member +
Texx said:
The 5 stud Type R are 5x114, the 4 stud Type R might be 4x114, but the remaining 4 stud DC2's are 4x100. I've got a set of 17's from a DC2 that I've used on the GT.
Click to expand...

I knew the type r's were 4 x 114.3 same as the ek9 but didn't realise the lesser dc2's were 4 x 100, but makes sense as the lesser civic's are too. :)
 
D

Duggy

Member +
thanks guys for all the comments just seen a set for 80 quid and fancied th look of them on my car. Feel a bit stupid but cheers
 
You must log in or register to reply here.
Top