Torque Settings for ARP bolts

[clarkytrd]

Need torque settings for the ARP Head Bolts, ARP Con Rod Bolts and also the Main Bolts.

Thanks,
John

 

[AzE_B]

i do these two in 2 stages of half
big ends 30 ft
mains 60 ft


head 60 ft of 3 stages 20 ft

 

[AzE_B]

shit im not sure if the 1st 2 are right now can someone confrim it

 

[sx_turbo]

it says it in the instructions of the arp bolts

 

[350ep70gr]

Need torque settings for the ARP Head Bolts, ARP Con Rod Bolts and also the Main Bolts.

Thanks,
John

Head bolts are 60ftlbs if the 4age one 10x1,25
Rod bolts are 28 ftlbrs if ARP 2000 5/16-24 bolts with pauter rods and 35ftlbs if you use engine oil.
Main bolts if ARP then are 60ftlbs
All with arp moly lube.
http://www.youtube.com/watch?v=wbzxCaEvAKY
Chris

 

[turboflow]

what do you guys tourque scat rods to in Nm, i ahve heard a few different

 

[350ep70gr]

what do you guys tourque scat rods to in Nm, i ahve heard a few different

From memomy scat rods have thicker ARPs and the torque is 50ftlbs.
Dont remember if 50 with arp moly lube or engine oil tho..
And dont take my word to it...just wait for someone else to confirm..

NM = ft/lbs x 1.356 =50 x 1.356 = 68 nm

Chris

 

[GaryGT]

Need torque settings for the ARP Head Bolts, ARP Con Rod Bolts and also the Main Bolts.

Thanks,
John

well lad all the Torque settings shud be on the Boxes u got them in and soem come with a data Sheet
can u not read the Table??

 

[clarkytrd]

cheers for that lads, i havent got the bolts yet.. just need the info for when i do put them in.

never knew the settings were on the box... sorry!

thanks

 

[GP82]

How much torque for 4EFTE ARP headbolts going in dry, no lube or engine oil?

 

[clarkytrd]

do ARP make main bolts.. to bolt the crank to the block???

 

[sx_turbo]

cheers for that lads, i havent got the bolts yet.. just need the info for when i do put them in.

never knew the settings were on the box... sorry!

thanks

sorry mate didnt mean to sound like an arse,


when you open the arp box you get an instruction manual in there and it says what torque to set them up to, that way takes out any guessing made my people on here

 

[sx_turbo]

do ARP make main bolts.. to bolt the crank to the block???

sort of,

there not listed for starlet

 

[clarkytrd]

sorry mate didnt mean to sound like an arse,


when you open the arp box you get an instruction manual in there and it says what torque to set them up to, that way takes out any guessing made my people on here

Ahh no Ricky your ok!! It was my fault lol.

Anyway, I appreciate the help!

Thanks alot mate!

John

 

[sx_turbo]

How much torque for 4EFTE ARP headbolts going in dry, no lube or engine oil?

dont they will break

 

[GaryGT]

do ARP make main bolts.. to bolt the crank to the block???

they dont make them for the 4E but they do make them for the 5E
it requires a slight additional tapping of the thread into the block !! they are slightly longer but the same thread as the 4E block!! so if u get them all u need to do is get a good tap set and ur laughing
ive done 2 engines with them and didnt have any problems


make sure u get the Lube with them great job
regards


G