TRD bushings Question?

williamocarroll1982

williamocarroll1982

Member +
Im just wondering if anyone can help me. Below are the diagrams of the front lower arms of the ep82 Gt and the ep91 Glanza V and a link to rhd for bushings for same. It states that the no2 set is listed for the ep82 and the ep91 but i was just wondering if anyone knew if no1 set would also fit the ep91 as well as the ep82. From looking at the diagrams I thought they are the same but maybe somebody who has experience with them could tell me for sure

http://www.toyodiy.com/parts/diag_AEKNiF.png

http://www.toyodiy.com/parts/diag_1rwyezw.png

http://www.rhdjapan.com/trd-lower-arm-bushing-no1-set-starlet-ep82-18615

http://www.rhdjapan.com/trd-lower-arm-bushing-no2-set-starlet-ep82-ep91-18616
 
Jay

Jay

Admin
Hang on - I was only going on the pic of the part number and I just noticed in the 'Product Specs' tab the numbers are different. I'd just err to the side of caution and stick to the ones for your chassis William.

Can't see there being a huge difference but that arm is vital to the handling of your car and would be considered unsafe if excessive movement was present.
 
williamocarroll1982

williamocarroll1982

Member +
OK, i was just wondering if the bushing at the front of the arm in a ep82 was the same as the bushing at the front of the arm in a ep91. The bushings at the rear of the arm are the same according to rhd so i just thought the front one would be too but i said i better ask first :)
 
You must log in or register to reply here.
Top