Where to get silicone bends for air filter relocater

D

dellybeans

Member +
Hello,

The set up i was running for my air filter relocater gave up yesterday got wet. So i want to get the silicone bend and some pipe. To make it proper want to DIY job so where the best place to get the material and what do i need. Thanks :beer:
 
popsy09

popsy09

Munster Area Rep.
dellybeans said:
Ok mate and what do i need to get. 90' bend ? ? ?
Click to expand...

depends where you want to put your filter i needed a 45 a joiner then a 90 to re locate behind the grill but thats only because the turbo is at an angle if your still ct9 i think its just 2 90 bends ...
 
D

dellybeans

Member +
popsy09 said:
depends where you want to put your filter i needed a 45 a joiner then a 90 to re locate behind the grill but thats only because the turbo is at an angle if your still ct9 i think its just 2 90 bends ...
Click to expand...

Yeah i had induction pipe ducting but got wet and week had it where the grill would be ? I have ct9 yeah at the mo have TD04 there but not going in yet as need to see about pipe work for autobahnn FMIC. Cheers mate i'll get that stuff ordered tomorrow rep for ya.
 
iamrab

iamrab

Member +
i used one of the tmic bends and the reducer for the ct9 a strigt bit of plastic pipe and then the filter stright tho i wiped out my aircon and modded the rad a little
 
D

dellybeans

Member +
iamrab said:
i used one of the tmic bends and the reducer for the ct9 a strigt bit of plastic pipe and then the filter stright tho i wiped out my aircon and modded the rad a little
Click to expand...

Yeah Air con is gone already but FMIC is there. I took the TMIC parts out of shed to see if i could wipp something up as read someone had done this method.
 
iamrab

iamrab

Member +
dellybeans said:
Yeah Air con is gone already but FMIC is there. I took the TMIC parts out of shed to see if i could wipp something up as read someone had done this method.
Click to expand...

yea mans mines the same with the fmic also,you can do it now its not gonan win any awards for tidyness but u can use that rubber elbow (use the bigger of the two) cut the original turbo pipe up and make up a peice ..ist easy enuff :)
 
iamrab

iamrab

Member +
Collett said:
Try these dude if not www.rallydesign.co.uk! Im looking at relocating my filter on an EP82 can this be done without removing air con?? If not how easy is remove air con?
Click to expand...

dunno about an ep82 on the ep91 you have to from what i could see cos there is just no room, removing the aircon was easy enuff mate ,took me about 20 mins fromt start to finish to take it all out
 
You must log in or register to reply here.
Top