karnaugh2005
Fresh Recruit
Guys,
I just dynoed my car yesterday and i dont know if the figures I got was good or not. Here's my specs and dyno results..
Specs:
4efte 2nd generation M/T
fmic and 2" piping all around
blitz vd bov
ngk bkr7e-11 (gapped .8mm)
emb
all stock internals
stock ct9a and actuator
drift mbc
stock ex manifold
stock air intake pipes
hks filter
2.5 down pipe then 2 3/8 piping after firewall
rota 15" wheels and kuhmo 195/55/r15
2 oil catch can (1 for pcv and 1 for breather
dynojet results @ 13psi
EMB mapping after dyno:
I just dynoed my car yesterday and i dont know if the figures I got was good or not. Here's my specs and dyno results..
Specs:
4efte 2nd generation M/T
fmic and 2" piping all around
blitz vd bov
ngk bkr7e-11 (gapped .8mm)
emb
all stock internals
stock ct9a and actuator
drift mbc
stock ex manifold
stock air intake pipes
hks filter
2.5 down pipe then 2 3/8 piping after firewall
rota 15" wheels and kuhmo 195/55/r15
2 oil catch can (1 for pcv and 1 for breather
dynojet results @ 13psi
EMB mapping after dyno:
Last edited: