4e wiseco piston part number

[laskt9]

As above what is the part number for 4e forged wiseco pistons

Sent from my HTC PH39100 using Tapatalk 2

 

[AdamB]

Part number I have here on the box : ASC-03178
Gudgeon Pin # : S621
Retaining clip # : CW18
Piston rings # : 2933XC

Hope that helps

 

[sx_turbo]

there a semi custom piston, wiseco make them to order only.

this place is in the usa and do loads of parts for the 4efte and good qaulity, might be worth a try, unless u want specificly wiseco

http://www.raceeng.com/p-11774-toyota-3e4efte5efe745mm-turborings-set.aspx

 

[elison]

Or some Wossners would also be great. Just about to finish my rebuilt with Wosnner ones. Seems great quality for the price.

http://wossneronline.com/forged_pistons/index.php?main_page=product_info&cPath=28_25&products_id=198

Cheers.

 

[bongskag]

the part numbers will differ with the size of the piston and also the dish.
I went for the -10cc dish for a lower compression ratio 74mm , this will also depend on what headgasket you want to use. weather you need a rehone or a re-bore, condition of the current bores.

they are very good pistons. no probs fitting them to the rods.

 

[AdamB]

Mine were 74.5mm with -10cc dish, thinking of swapping them though for something with larger valve cut outs for higher lift and larger valves, and also without a dish for higher compression.

So many variety of pistons out there, it all depends how you want the car to perform.