How do you raise the oil pressure ?? I've seen it mentioned a good few times across various forumsGood stand alone ECU. Remove the stock distributor(you can keep it for TDC reference) and fit 60-2 on the crank and coil on plug.
Good exhaust manifold. 4AGZE injectors and upgrade fuel pump.
ARP head bolts, and MLS gasket if you are after 300Whp
New OEM oil pump and raise the oil pressure.
basically shim the oil pressure relief valve---put a washer(s)/spacer(s) into it to bump up the pressureHow do you raise the oil pressure ?? I've seen it mentioned a good few times across various forums
Good stand alone ECU. Remove the stock distributor(you can keep it for TDC reference) and fit 60-2 on the crank and coil on plug.
Good exhaust manifold. 4AGZE injectors and upgrade fuel pump.
ARP head bolts, and MLS gasket if you are after 300Whp
New OEM oil pump and raise the oil pressure.
I know nothing about Apexi power fc and commander, but when it comes to high power demand goal on a small engine do not cheap out on engine management!Thanks man i have managed to get my hands on a apexi power fc and commander! Am planning on going with 250whp but am waiting on forged parts from TD.
Will look into distributor haven't heard of that being done!