4efte conversion help !

[SCOTTIX]

i have a starlet solida and have done a full glanza v body conversion and have recently bought a complete 4efte engine and loom +ecu off (GT BITZ ) and a dash loom off another guy ( they are both meant to be from a glanza but im not too sure ) any help would be great

the dash loom sits into the glanza V clocks if that is any help and there is only 1 white plug what fits into the engine loom ??? the blue plug in the engine loom is different to the dash loom blue plug, is there only one plug whats needed

is there any links to guides and or could anyone direct me to a cuple of stock engine bay pictures so i can see where the vacum pipes and others go and and wiring conversion guides wud be a great help



thanks

regards scottix



( please no sarcastic comments )

 

[SCOTTIX]

surely sumone knows sumthing to help out with this ? wiring is gona be a nightmare or can lead me to sumone who knows about the conversions ?

 

[weeJohn]

Use the search function at the top right of the page in the technical section electrical sub section, this has been covered loads. You will need some electrical experience to do this, its not a straight swap.

 

[SCOTTIX]

no joy mate theres nothing helpful about conversions anywere and getting alsorts of different info about wiring looms being changed in nerly all models and facelifts
i have a few plugs needed to be checked to wee what the wires are they are as follows

 

[SCOTTIX]

( 2 pin -black/white , white/black )


(green connector - 1 pin -green/red)





(x2 plugs -2 pin -brown,white)
(-1 pin - white)



(fusebox left overs - thick -red/white , black , pink



(blue plugs inside dash next to ecu - N/A plug ( x5 pin -thick blue/black, thick white/red , red/yellow, red/white, yellow/red







glanza - x8 pin - pink/black , yellow/black , yellow/green , white/red , grey , red/yellow , black/white , green/yellow