Acuator Help!!!

[paddy98]

I fitted a new turbo with a hks actuator the other day and reconected the pipes back the same way they wer on the standard one..has anyone any pics of the pipes the right way running an ebc too? thanks in advance!!

 

[aidan]

the vac pipe from the turbo needs to go to your ebc then from your ebc to your actuator simple as

 

[paddy98]

Im suffering from serious boost creep and was hoping this had sumthin to do wit it !!

 

[aidan]

unlikely if its working its piped right has youe ebc a gain setting if so it may be set too high

 

[paddy98]

nope..i have the ebc set at 0 its jus the actuator doin the work i set it to .6 but still it creeps up near a bar

 

[aidan]

what controller have ya..try disconnect your solenoid and pipe actuator as standard and see what it does

 

[paddy98]

a shitty hdi one!! pipe from actuator to turbo??

 

[pig666eon]

get some pics up lad show us what you have done

 

[paddy98]

will do wen i get a chance!!

 

[aidan]

a shitty hdi one!! pipe from actuator to turbo??

yea same as it was before ya plumbed in the solenoid

 

[pig666eon]

it really depends on what ebc he has, i have a hks one there and they use 3 ports one for the actuator and two for sensing the boost from the turbo and one then for the inlet

if you wanted to just leave out the ebc for now just pipe the turbo to the actuator and set the arm to the boost you want

 

[paddy98]

there 2 ports front the ebc..ye i think il just stick to using the actuator only for the min..thanks!!

 

[aidan]

just bypass it and see what happens first if ya then still have all the creep it aint down to the ebc

 

[dark_knight]

pictures.. pictures.. pictures..!