starletgt.neal
The Brightest BULB
hi guys ive searched for quite a while to find this now b ut no luck..i was wondering how many psi is .8 bar of boost?? thx neal
boost / psi
- Thread starter starletgt.neal
- Start date
starletsam
Member +
doesn't the fuel cut hit in at 13.2 psi?got a gauge in today mines boosting at .5 bar in low and reaching bout .95 bar in high and fuel cutting.went to get the actuator changed,got everything out basically then ran out of time and had to put it back together as i have work in a bit and its gettin dark
u can use this
http://www.centauro-owners.com/articles/psibar.html
http://www.centauro-owners.com/articles/psibar.html
glanza_dan
Fresh Recruit
very handy link thanks
rep
rep
starletgt.neal
The Brightest BULB
ahh yes that is a real handy tool lol! thx for the replies guys ime not wrong in thinking then 11psi is .75 bar which is just below fuel cut on the standard ecu(ep82) baring in mind i have a pretty much stock engine,meshed turbo,blitz bov,4-2-1 mani to be fitted will this be fine?? thx again
neal
neal
Roy-GT
Fresh Recruit
doesn't the fuel cut hit in at 13.2 psi?got a gauge in today mines boosting at .5 bar in low and reaching bout .95 bar in high and fuel cutting.went to get the actuator changed,got everything out basically then ran out of time and had to put it back together as i have work in a bit and its gettin dark
my near enough standard ep82 almost hits the end of the standard boost guage which i presume is about 0.9bar and i dont hit fuel cut???
the standard boost gauge is about 0.75 bar therefore if your near the top of it doesn't mean the fuel cut will kick in, u'll know whn it does cause the car will buck then eventually cut out (not good for the engine).