Bajanplaidman
Member +
On my ep82 my brakes were perfect. From the time i touched the pedal the car would cut back good speed. The harder i pushed or lower to the floor the more braking power. Pedal never got near the floor. Thats how I like my brakes. In my EP91 with ABS it was the same thing as the abs doesn't work. Even removed the abs fuse. Changed pads car braked fine as I'm not a fan of abs I never replaced the fuse. Now after a year and some. My left rear caliper is sticking but more importantly I was getting little resistance in my pedal.
In other words my pedal would be almost near the floor before it started to brake. But it would brake. I bled my brakes yesterday and its become even worse. At first the brakes were great.
But now, if at speed I slightly hold to brake to slow down, the pedal just dips and dips almost to the floor as if loosing pressure. I then have to press again to get feedback in the pedal and braking ability. If I am at a stop waiting for a light with my foot on the brake, it will then dip and dip and dip till it gets near the floor.
I presume I am loosing pressure. Is this the Brake Master Cylinder? Can it be fixed or must it be replaced.
In other words my pedal would be almost near the floor before it started to brake. But it would brake. I bled my brakes yesterday and its become even worse. At first the brakes were great.
But now, if at speed I slightly hold to brake to slow down, the pedal just dips and dips almost to the floor as if loosing pressure. I then have to press again to get feedback in the pedal and braking ability. If I am at a stop waiting for a light with my foot on the brake, it will then dip and dip and dip till it gets near the floor.
I presume I am loosing pressure. Is this the Brake Master Cylinder? Can it be fixed or must it be replaced.