Coolan Housing

[alfradio]

Coolant Housing

Took head to machine shop to have work done on it and the
coolant housing was attached to the head.... The guying
doing the work on the head (for whatever reason) removed
the 3 "things" which hold the coolant housing to the head and
put all the items in a box (which I brought home with the
coolant housing)

While there are 3 bolt holes on the housing, I was surprised to
find only one bolt in the box....? (I did also find 2 nuts)

Can I assume that perhaps the other two holes are for studs
which come from the head (go through the housing) and are
attached with the two nuts which were also in the box?

alf

 

[weeJohn]

Yes Alf, 2 studs with nuts and 1 bolt, I think the bolt is shorter than the other 2 so it can only go in 1 position, but I am not 100% sure which one. Easy to check by trying the bolt in each of the 3 thermo housing holes, see what one it suits best.

 

[alfradio]

Yes Alf, 2 studs with nuts and 1 bolt, I think the bolt is shorter than the other 2
so it can only go in 1 position, but I am not 100% sure which one. Easy to check
by trying the bolt in each of the 3 thermo housing holes, see what one it suits best.

Thanks a bunch!

alf