engine management light

hatchet_66

Fresh Recruit
my light is always on but i have taken it to garage and they say there is no faults showing so i dont know why it is still on, how can i turn it off?
 

Texx

Super Moderator
if the light fails to turn off or do the test, the ecu may be at fault

Disconnect both connectors from the ECU and turn the ignition ON. If the lamp still illuminates then there is a wiring issue (short to ground) on the earth side of the lamp. If the lamp goes out with the ECU disconnected then the ECU is causing the lamp to illuminate.
 
Top