Enjoy...!

350ep70gr

350ep70gr

Member +
http://www.youtube.com/watch?v=8p0UGX65HTw

This is part 1. I have just finish my bottom end assemply and i have all the videos wich i will post when it is totally built as a kind of a guide for those who want to know what job is envolved in details (many many on them)builting a star forged engine.
All opinion are welcome!!!;):eek:


UPDATE 7/9/2009: Some maybe helpfull videos about my built. There are totally 7 parts and i think will be all up in a few hours. (damn slow uploading speed) It was a 50 min video but youtube says only 10 min are acceptable so i made it 7 parts.Hope it is a good guide for all. If you think you like my hard try then maybe i will continue with the head and the rest of the built.
Once more ENJOY..

(Part 2) http://www.youtube.com/watch?v=kOzjdkOaZOA
(part 3) http://www.youtube.com/watch?v=JNypvuM_K3I
(part 4) http://www.youtube.com/watch?v=V0f8xS2SUPg
(part 5) http://www.youtube.com/watch?v=wbzxCaEvAKY
(part 6) http://www.youtube.com/watch?v=oWfwOjdcJcg
(part 7) http://www.youtube.com/watch?v=v1n90MHHcCw

UPDATE 6/11/2009

(part 8) http://www.youtube.com/watch?v=-65WEGB2j2c
(part 9) http://www.youtube.com/watch?v=oT33BKVU_PY

UPDATE 8/12/2009

(part 10) http://www.youtube.com/watch?v=QB9PCwQsQM4

Chris
 
Last edited:
EP824U

EP824U

Member +
GReat attention to detail. rep added mate. wat do u need to achieve that finish when polishing?
 
350ep70gr

350ep70gr

Member +
KrissyB said:
outstanding matey
Click to expand...
Apreciate krissy! In the real world polishing is a lot better than it looks via the camera....for part selection tho ..for me was a tested root...so we will have fun (again)once the engine is fired up..
Thanks for the comments

Chris
 
12345678

12345678

Member +
350ep70gr said:
If it is a great demand about polishing ...why not mate. Can incude a demo also. It isnt one of my top secrets tho..:p

Chris
Click to expand...

feel free to pm me if you would rather. i was thinking about getting some of the polishing kits on ebay and having a go, but if you could recommend what i should buy to do it would be great :)
 
350ep70gr

350ep70gr

Member +
12345678 said:
feel free to pm me if you would rather. i was thinking about getting some of the polishing kits on ebay and having a go, but if you could recommend what i should buy to do it would be great :)
Click to expand...

Mate any e-bay polish kit will do the job. Polishing job for a part like rocker cover may take you only 10-15 minutes. The key on this job is how you prepare the part you gone polish. This may take you a few ours or more.And if you doing by hand be sure you will loose your fingerprints for some days. Or else you need professional big 3 phase motors with different buffs and different number pastes.

Chris
 
lleey2k4

lleey2k4

Member +
Thats amazing, even the gearbox haha.

I'd love to see how you do it as theres a few bits id like to polish up in my engine bay like rocker cover and a few other bits.
 
350ep70gr

350ep70gr

Member +
lleey2k4 said:
Thats amazing, even the gearbox haha.

I'd love to see how you do it as theres a few bits id like to polish up in my engine bay like rocker cover and a few other bits.
Click to expand...

Tbh by black magic tricks :p. I will prepare a video but after my rebuilt because at this time i have no time for anything else. But if the Greek guy promise..many of you will know that will not forget!!!


Chris
 
350ep70gr

350ep70gr

Member +
12345678 said:
feel free to pm me if you would rather. i was thinking about getting some of the polishing kits on ebay and having a go, but if you could recommend what i should buy to do it would be great :)
Click to expand...

For an easy diy job i d say

240 grit 400,600,800,1000,2000 all with water.At the end of this stage you will be able to see the part scratch free.
Then hard buff with white paste (give it some 90 deggrees turns after some minutes)
Then soft buff (as softer as better) with white paste.

Chris
 
Sheldon

Sheldon

Malta Area Rep.
thats some great work dude!! its gonna look like one of puff daddys cars with all that bling!! haha

nice mate really great work!!
 
You must log in or register to reply here.
Top