fuel cut defencer wireing questions can you use ur front speaker + and - for the fcd?

[grazza]

hay guys just wondering if you could use the front speaker live and negaive for the live and negative power source for the fuel cut defencer or is it not a ignition live and negative? coz had my last fuel cut defencer scotch locked in to the ecu live and negative and it wasnt a good connection and now the fuel cut defencer doesnt work id rather wire it in to another power source than the ecu's and any sugestions for good fcd as ive had 2 hks fcd's and their abit tempramental!

 

[pig666eon]

one word fail! haha

there is no 12v source from the speakers you will have the wire the two into the ecu harness so its getting the same feed as the ecu not essential just pref

 

[grazza]

thanks m8 is their any other + and - i could wire it in to? i dnt wana fuck around with my ecu's + and -

 

[pig666eon]

you will have to cut the loom to wire in the rest of it so in for a penny..........

there is good detailed photos on how to wire it its a simple job not much can go wrong if you get me........ installing it anyway

 

[stuarty1]

just wire it to ur map sensor in the engine bay but easy as

 

[stuarty1]

http://www.toyotagtturbo.com/forums/showthread.php?11807-How-to-fit-the-jam-FCD-via-map-sensor-* sorta the same thing wat hav u adjusted ur fcd to ??

 

[Stulet-GTT]

POs an neg on ya speaker is not a proper 12v source, even if it was it would only be on when stereo on...

Get ya power from ignition as its the best place...