hello!!!

brewin

Member +
hello everyone!
weve got a 95 quad light gt (well its my girlfriends!) and have
had it a few years now havent realy done much with it due to me spending on my car!,
it looks nice but it needs a bit more poke so can you guys give me some pointers on what to buy to get to about 160bhp to the flywheel. cheers

oh and ive got a bailys venturi dumpvalve for sale 2 with fittingkit 50pounds :)


http://i269.photobucket.com/albums/jj46/brewin1000/sally2.jpg

http://i269.photobucket.com/albums/jj46/brewin1000/sally1.jpg
 

Toby@ToyTuning.com

Banned - DO NOT BUY FROM TOYTUNING
Welcome aboard Brewin!

This is what I would advise as a basic starter kit for 160bhp:


. Toy Tuning Mild Steel Manifold

· Zep Decat / WEPR Decat

· Cat Back system (Greddy/5Zigen/Blueflame/WEPR)



The car is now expelling gases more efficiently.



· Power Enterprise Air Filter or similar

· Heat Reflective tape for Inlet Track



Car is now breathing more efficiently



· Raise the Rear of the Bonnet with washers

· Front Mounted Intercooler (Autobahn or similar)

· Sard Thermostat

· Sard Rad Cap



Car is now cooling more efficiently



· New Spark Plugs (NGK 7 – one grade colder)

· New HT leads (Magnecore 8.0mm)

. Inspect Rotor and Dizzy



Ignition system up to scratch



· Uprated Fuel Pump

· Sard Fuel Pressure Regulator Kit

. Greddy Emanage (optional, FPR alone is Crude but you will be able to get a safe setup)

· Rolling Road Session



Car now fuelling adequately


This should net you around 160bhp on 15 psi. This then leaves the brakes and chassis which will need to be sorted to cope with the power. I would recommend at a min:



· 3G 10GR Front Disks

· Mintex Pads

· New OEM Rear Pads

· Braided Brake Lines

· Cusco BMCS



You can now stop!



· Coilovers / Koni Shock Absorbers with Whiteline Springs

· Front and Rear Strut Braces

· Whiteline Panhard Rod

· Cusco Lower Arm Bar

· Anitlift kit



Power to ground greatly improved.



That’s a basic list of what we recommend, obviously there are many more parts that will net you a good handling car that can stop with power to match but that's a basic idea on what you can do to transofrm the car. Obviosuly this neglects the mechanical condition which is just as important..

T
 

sx_turbo

Lifer
thats a good list toby. exactly what i done to mine, except i left the braking system standard lol.


and welcome.
 

Toby@ToyTuning.com

Banned - DO NOT BUY FROM TOYTUNING
Yeah that's what we've done with no 2, just to show what can be done with a realistic budget and time frame. Stock brakes are pretty good but it's always wise to consider an upgrade as you know :)

T
 
Top