IDLE CONTROL VALVE Plug OR Which wire to what pins on sensor

[Rory]

As above,

Looking for a Idle contrrol valve plug (from the loom) with a couple inch of tail on the wires.

Its a long shot but i cut mine off, and cant remember where i put it... :homer:

Anyone?

Rory

 

[Rory]

Anyone?

OR

Can anyone tell me which wire goes to which pin on the ICV?
If anything ill just use connectors.

Rory

 

[Rory]

Up again for my dumb ass mistake...

 

[GlanzaV.Tee]

might have one m8 on a spare wiring loom i had if you need let me know al check for ya 2nite

 

[Rory]

Up we go.

Nobody can at least go and have a quick look at the wiring for 1 mninute?
Its 2 wires!
At least tell me, which side the pink/black wire goes to??

Please.

 

[kieran.s gt]

Up we go.

Nobody can at least go and have a quick look at the wiring for 1 mninute?
Its 2 wires!
At least tell me, which side the pink/black wire goes to??

Please.

red/black wire goes to the bottom pin
pink/black wire goes to the top pin

 

[Rory]

Cheers Kieran

 

[weeJohn]

Not matter what way round, its just a coil.