johnny_k
Member +
Hows it going everyone?
Iam currently getting my glanza v ready to go back on the road. I've put brand new brakes all round, HEL lines and also rebuilt all of the calipers.
The issue iam having is the rear drivers side calliper will not bleed. All other calipers will bleed fine.
There is no fluid at the rear drivers side calliper so I tracked the line to the front of the car to the proportion valve on the bulkhead.
The line to the very left of this valve is also dry so I tracked this line to the a.b.s pump.
I removed this line from the pump and pumped the pedal but no oil is coming out of the pump. There is oil at the other lines.
The A.B.S pump primes as normal and light goes out on dash.
Anyone experienced this before?
Thanks
John
Iam currently getting my glanza v ready to go back on the road. I've put brand new brakes all round, HEL lines and also rebuilt all of the calipers.
The issue iam having is the rear drivers side calliper will not bleed. All other calipers will bleed fine.
There is no fluid at the rear drivers side calliper so I tracked the line to the front of the car to the proportion valve on the bulkhead.
The line to the very left of this valve is also dry so I tracked this line to the a.b.s pump.
I removed this line from the pump and pumped the pedal but no oil is coming out of the pump. There is oil at the other lines.
The A.B.S pump primes as normal and light goes out on dash.
Anyone experienced this before?
Thanks
John