Gee
Member +
For sale: AE101 2 POT Brake Conversion Kit Ready To Go*
Item Condition: Discs, spacers, pads and pad fitting kit are all brand new. The calipers and carriers are used.
Price and price conditions: £400 + delivery
Extra Info:
Included in the kit is the following:
AE101 2 POT calipers with carriers.
AE101 discs which have been grooved and machined to 260mm for fitment.
AE101 brake pads with fitting kit.
8mm spacers needed for fitting.
Longer studs (M12 x 1.5, 63mm length).
All of this completes everything needed in order to fit the brake setup which I have taken from the guide here.
I believe the diameter of the hub hole in the middle of the disc is 55mm (?) which is the fitment for later EP82's (?) and Glanzas. Any confirmation from someone would be appreciated.
The only thing needed is a drain plug from one of the calipers, easily obtained from Toyota.
Pictures:
The discs
Enlarge - 1 2 3
The spacers
Enlarge - 1
The calipers
Enlarge - 1 2 3 4
The pads and fitting kit
Enlarge - 1
Extended studs
Enlarge - 1
Misc and spare clips
Enlarge - 1 2
Contact Details: U2U
Location: Huddersfield
Delivery & Conditions of Delivery: Postage cost on request. Need to package and weigh.
*Only item missing from the kit is a drainage bolt from one of the calipers. This can easily be obtained from Toyota.
I have been advised that for all other additional fittings/bolts for the calipers can be used from your existing calipers.
If in doubt, please research.
This kit is complete to the best of my knowledge as taken from the guide here
I can not be held responsible for any additional componants needed.
Calipers were purchased in working order as advised by the seller. I have not tested these myself.
Any transaction is final!
Item Condition: Discs, spacers, pads and pad fitting kit are all brand new. The calipers and carriers are used.
Price and price conditions: £400 + delivery
Extra Info:
Included in the kit is the following:
AE101 2 POT calipers with carriers.
AE101 discs which have been grooved and machined to 260mm for fitment.
AE101 brake pads with fitting kit.
8mm spacers needed for fitting.
Longer studs (M12 x 1.5, 63mm length).
All of this completes everything needed in order to fit the brake setup which I have taken from the guide here.
I believe the diameter of the hub hole in the middle of the disc is 55mm (?) which is the fitment for later EP82's (?) and Glanzas. Any confirmation from someone would be appreciated.
The only thing needed is a drain plug from one of the calipers, easily obtained from Toyota.
Pictures:
The discs
Enlarge - 1 2 3
The spacers
Enlarge - 1
The calipers
Enlarge - 1 2 3 4
The pads and fitting kit
Enlarge - 1
Extended studs
Enlarge - 1
Misc and spare clips
Enlarge - 1 2
Contact Details: U2U
Location: Huddersfield
Delivery & Conditions of Delivery: Postage cost on request. Need to package and weigh.
*Only item missing from the kit is a drainage bolt from one of the calipers. This can easily be obtained from Toyota.
I have been advised that for all other additional fittings/bolts for the calipers can be used from your existing calipers.
If in doubt, please research.
This kit is complete to the best of my knowledge as taken from the guide here
I can not be held responsible for any additional componants needed.
Calipers were purchased in working order as advised by the seller. I have not tested these myself.
Any transaction is final!