Update.....I installed everything and used the base map 02emichan sent me and after i re-did some faulty wire mix ups with my sensor grounds...... it started first time and idles well.
The coil packs I wanted to use have internal logic so EDIS cant fire them. But looks like I can eventually dump EDIS module and once I am comfortable with my skills I can easily modify my board to use those coil packs since I wont need high power outputs to make fire.....
Good thing to cause I am just understanding that I cant really set a true rev limit with the EDIS module....I have to work with what ever OEM REV limit Ford put on the engine this module left factory with, some say 9000RPM others 9500RPM for the EDIS4.
The only thing I had big enough to fit those odd EDIS coil plugs..... The silicone ends of these wires made themselves fit.
Got a TD04HL-19T to install. Left it off the manifold and installed a plate so I could tune off boost without worrying about boost.
Got some RX7 460cc injectors, do these work well with these engines? Stock 295cc in there right now....but if I crank up the fuel pressure they would be rated over 330cc i believe
Should I set cams to 5E now? I could never get it to start on 5E marks on the 4EFTE brain.