Hi everyone!, I've had an issue with my engine since the first time i turn it on, is not really an issue but i know something is not right, let me explain...
When on idle the car hesitates a lot, but the revs doesn't move neither up or down, it varies a little bit but is almost imperceptible. I posted that sometime ago, and someone suggested that it could be the valve shims or something like that, because when i run it, it runs fine, no issues at all, is only when is on idle... and the engine is some kind of a noisy one, but as I've been reading here, these engines suffer from that.
Here's a little video i film a while ago,
http://video.google.com/videoplay?docid=6241938771430334021&ei=6yfnSe-WJoP--gHr3JSMAg&q=erratic+idle
You need to pay close attention because it was shoot with my phone, so audio quality is crap.
So, the thing is, i'm gonna port and polish the head soon, so i want to check the head while is out and change whatever it needs to change (valves, springs, shims, etc.), my question is, does this head uses the same valves, shims that the 5efe uses??? if not, where i can get all those parts (in my country they never imported starlets so is really difficult to get those type of parts for the 4efte specifically).
I was thinking that maybe one of the shims isn't propertly sealing and maybe that why on idle my car behaves like that, what do you guys think???
When on idle the car hesitates a lot, but the revs doesn't move neither up or down, it varies a little bit but is almost imperceptible. I posted that sometime ago, and someone suggested that it could be the valve shims or something like that, because when i run it, it runs fine, no issues at all, is only when is on idle... and the engine is some kind of a noisy one, but as I've been reading here, these engines suffer from that.
Here's a little video i film a while ago,
http://video.google.com/videoplay?docid=6241938771430334021&ei=6yfnSe-WJoP--gHr3JSMAg&q=erratic+idle
You need to pay close attention because it was shoot with my phone, so audio quality is crap.
So, the thing is, i'm gonna port and polish the head soon, so i want to check the head while is out and change whatever it needs to change (valves, springs, shims, etc.), my question is, does this head uses the same valves, shims that the 5efe uses??? if not, where i can get all those parts (in my country they never imported starlets so is really difficult to get those type of parts for the 4efte specifically).
I was thinking that maybe one of the shims isn't propertly sealing and maybe that why on idle my car behaves like that, what do you guys think???