Sard fpr

[Qwerty123il]

Hi,
I am buying a sard Fpr to accompany the FCD I'm having installed. But I don't know which adapters to buy! If someone could point out all the ones I need from the link it would be very helpful. Also of you know of a uk based supplier please let me know!
Thanks
Fpr its self:
http://www.rhdjapan.com/sard-standa...8mm-nipple-special-edition-almite-black-55193
Adapters
http://www.rhdjapan.com/toyota/ep82-ep91-starlet/adapters-fittings-lines

 

[funny onion]

i've just bought an fse rail adapter for £20 delivered. i don't think you necessarily need a sard rail adapter to go with a sard fpr, you can get any adapter as long as it fits the fuel rail. out of those i'd go with this one;

http://www.rhdjapan.com/sard-vehicle-specific-fuel-regulator-adapter-56413

 

[Qwerty123il]

Is that all I would need, what about the other adapters not for mounting?

 

[funny onion]

you'll need an adapter for the fuel rail and some fuel line to run to the fpr. as for mounting it that depends where/how you want to mount it. wish i could afford an sard fpr :/

 

[Qwerty123il]

The things I'm confused about are things like this;
http://www.rhdjapan.com/sard-8mm-fuel-line-fitting-nipple-22659
http://www.rhdjapan.com/sard-fuel-pressure-regulator-adapter-nipple-straight-8mm-56411
Do I need them?
The SARD fuel line is pretty expensive! But then again it it quite a lot and I shouldn't need that much. Do you have an approximate length for the fuel line I'll need?

 

[Qwerty123il]

The other thing, I know it's not a SARD but this seems to have everything and is cheaper,
http://www.camskill.co.uk/m19b336s1...ure_Regulator_-_(EP82_and_EP91_Starlet_Turbo)
Anyone have experience with that?

 

[funny onion]

no i very much doubt you'll need those, they look like alternative options for fuel rails that sit close to other parts, like i say mine is an fse but my friend has the same sard fpr on his skyline and iirc he just used a rail adapter (ebay job) and fuel line. not sure how much because i've not fitted mine yet but not alot at all but again depends on where your planning to mount the regulator. i wouldn't buy the fuel line from sard personally, it's massively overpriced, you can get fuel line from a decent motorfactors, or you could even get braided line cheaper than the sard stuff!

 

[Blak_Mamber]

The other thing, I know it's not a SARD but this seems to have everything and is cheaper,
http://www.camskill.co.uk/m19b336s1...ure_Regulator_-_(EP82_and_EP91_Starlet_Turbo)
Anyone have experience with that?

A lot of people use these mate. Very good and ive never had a problem with the one i run at the moment. Get all you need in one kit

 

[Qwerty123il]

A lot of people use these mate. Very good and ive never had a problem with the one i run at the moment. Get all you need in one kit

Exactly does seem cheaper and less of a faf, I take it I'll still need an adapter?

 

[Blak_Mamber]

Adapter? It looks like you get everthing in that kit dude

 

[Qwerty123il]

i've just bought an fse rail adapter for £20 delivered. i don't think you necessarily need a sard rail adapter to go with a sard fpr, you can get any adapter as long as it fits the fuel rail. out of those i'd go with this one;

http://www.rhdjapan.com/sard-vehicle-specific-fuel-regulator-adapter-56413

Adapter as in the same as that for the SARD to make it car specific. ^^^^^^^

 

[Blak_Mamber]

That kit is for the starlet, isnt that the 'adapter' in the pic to the left of the FPR?

 

[Qwerty123il]

I suppose it probably is! I just wanted to make sure!