snapped my sump plug

[tanabe]

i 've snapped my sard sump plug, can someone tell me how to get it out of the sump please

 

[Stulet-GTT]

If ya cant get it with plier's then you will have to take sump off...

 

[Matt Glanza]

I did mine the other week and all I did was put a flat head screw driver up the hole and turned the snapped bit out.it should come out fairly easily

 

[tanabe]

I did mine the other week and all I did was put a flat head screw driver up the hole and turned the snapped bit out.it should come out fairly easily

i'll give that a try, i didn't think a sump plug could snap clean in half like that and it was sard mag plug too?

 

[corofin12345]

drill a hole in the center or the broken plug and screw a bolt into it and twist off.. i spot welded the bolt i screwed in and came off no bother.. be carefull not 2 round the threads on the sump itself

 

[andybill]

same happened to me, i overtightened it. hammer and a small sharp chisel did the job, pain in the arse tho wont do that again !

 

[tanabe]

Thanks for the help guys, got the little fucker out , won't be using a manetic sump plug again

 

[durmz]

Thanks for the help guys, got the little fucker out , won't be using a manetic sump plug again

just dont over tighten it mate, will be fine