sump gasket?

[jimglanza]

Sump is getting a little oily now so time to renew the gasket while its tucked up in the garage.

Just thought i would ask before crawling under the car but is there a pre-made gasket or is it the same case as most cars where you get the gasket sealant out and do it your self?

Thanks,
James.

 

[kieran.s gt]

no gasket just use a good quality sealer

 

[weeJohn]

Sealant, there are a few threads about doing it properly, including a Toyota workshop manual guide that Texx posted.

 

[venomconcepts]

http://speedvisioncps.com/index.php?main_page=product_info&cPath=29&products_id=172
4efte sump gasket

 

[jimglanza]

Cheers guys, thanks for all your help.

The gasket will work out as over £30 posted so will probably use some sealant.

Any good sealants that you would recommend?

Thanks.

 

[starletgt-shady]

http://www.fensport.co.uk/Parts/Model_39/Category_12/1042
really good stuff

 

[dac69er]

loads more than you would ever need.

http://www.halfords.com/webapp/wcs/..._productId_173106_langId_-1_categoryId_255217

i have used this on 2 different sumps. there is enough there to do about 5 sumps.

 

[Skalabala]

I have always been using this.
When doing a 4E sump you need to scrub all surfaces clean with steel wool or something similar.
Then clean sealing surfaces with thinners and cloth.
And then put a worm all around on the sump surface of about 7mm thick and do not spread flat with your finger.
Then plonk it on and tighten.

Locktite