richglanzav
Member +
hi, does any1 know of any feedback for these brakes. im after a decent kit for my ep95 and these are a fair bit cheaper than the wilwoods. but i havent heard of any feedback at all for them.
cheers.
cheers.
WMS 4 Pots
- Thread starter richglanzav
- Start date
MARK@CMBAUTOS
Trader
wd'40 and vice grips !
Iain@CRD
Lifer
I used plenty :haha: problem i think was someone already had a go at them and part rounded them, made it such a joy for me :haha:. The vice grips but work a complete treat! Drivers side was easy as i just removed the metal brake line from under the bonnet.
Philip0694
Member +
I've had them almost since he started to sell them. As he only lives a few miles down the road I went and collected mine.
Mint brake setup, still very impressed with them and I have had no problems on the road or track! Would recommend these!
Mint brake setup, still very impressed with them and I have had no problems on the road or track! Would recommend these!
Tim@TBDevelopments
Lifer
i've got them one my glanza, always been very happy with them.
they do make a little bit of noise i find with the pads rattling in the calipers but thats common for 4 pots, but i have found if you modifiy a set of mr2 sw20 rear brake pad springs onto these they add some tension and remove all noise
great upgrade.
give me a shout if you need a set or want advise regarding the spring modification
Tim
they do make a little bit of noise i find with the pads rattling in the calipers but thats common for 4 pots, but i have found if you modifiy a set of mr2 sw20 rear brake pad springs onto these they add some tension and remove all noise
great upgrade.
give me a shout if you need a set or want advise regarding the spring modification
Tim
dac69er
Super Moderator
i've got them one my glanza, always been very happy with them.
they do make a little bit of noise i find with the pads rattling in the calipers but thats common for 4 pots, but i have found if you modifiy a set of mr2 sw20 rear brake pad springs onto these they add some tension and remove all noise
great upgrade.
give me a shout if you need a set or want advise regarding the spring modification
Tim
i get this problem slightly on my gt4 twin pots when i go over bump. can here them rattle a bit. regrease them all and they stop for a while
Tim@TBDevelopments
Lifer
yeah but gt4 has pad springs as standard, where these don't but i modified a set of mr2 rear pad springs, (just bend the locators out 90 degree) and they work perfectly
TIm
TIm