Search results

I've got an ep71 with the stock 2e-te motor. The previous owner has removed the cat and fitted a dump pipe with the Exhaust Gas Temp sensor plumbed into it. Should my cat over temp warning light be on all the time now with the extra flow going past it? Or does it mean the sensor is faulty? I...

I've got an EP71 with the stock 2e-telu motor. Its having issues with idling high and pinging under boost. At first, i thought it was the coolant temp sensor. Did a sweep test on it and its fine. Next i tested what i thought was the o2 sensor... but it turns out (pretty sure) to be a...

Ok, so after putting an ep71 back together (I got it in parts) I cant get it to run right. To get the idle down and to make it run, I've had to screw the idle screw in all the way and fully retard the timing and it's still idling around 1000rpm! I set the cam up with the 2e hole on the cam gear...

Anyone tried it before? Or knows at wat point they go bang? Lol It's got a high flow exhaust, turbosmart boost tee and an air fuel meter to make sure it doesn't lean out on me. Just replaced the turbo seals and fitted a new stock thickness headgasket. I've read somewhere they can handle 15psi...

Hey guys, Just bought an A/F meter gauge, got it mostly installed but cant find any info on where the wire is comin off the ECU to connect it to? Any of ya's know ? Or i'll just have to connect it to the o2 sensor i guess.

Does anyone have any info on how to set the stock cam on my 2E-TELU ? ? I put the crank at TDC on #1 and fitted the cam gear to the cam. On the cam gear it has 2E and 1E positions on it, with a little hole through it, which i am guessing is so you can line it up with the dot on the head...

Hey guys, I recently picked up a EP71 GT turbo with a blown headgasket. After sorting out the headgasket and some cam timing issues, now the problem seems to be that I cant find a diagram of where all the vacuum hoses go?? (The vehicle was in pieces when i got it) The engine in...