Search results

  1. C

    problem with gearbox/starter motor

    Hi to all recently I swap my gearbox with a Cusco LSD for a non lsd box, the problem now is the starter motor, is hitting the flywheel, is there any difference between boxes? starter motor position on gearbox? please help me, can not run the car due this problem brgds from Chile Axel
  2. C

    ecu compatibility

    Hi All i wanna know if there is no problem to run a BLITZ ECU with a Apexi SAFC2? want to increase boost on my Mini (Old Clubby with a 4efte engine), got FMIC, 2.5" SS exhaust & downpipe, no cat, my plans is to run 1bar (Blitz ECU is setted to 1.1bar) and how much power can obtain with this...
  3. C

    N/A G´Box on a 4EFTE

    Hi All can i use a 4efe (NA engine) gearbox on a 4EFTE engine? are this g´box strong enough as the 4EFTE box? thnks from Chile
  4. C

    help identify an LSD diff

    need to identify this LSD, can anybody help me to found the brand? no description on LSD :( dunno how to recognise brand of this diff
  5. C

    BHP for a Mini Clubman 4EFTE powered

    Hi Ppl! need to know from the ppl here estimated power of my 4EFTE powered Mini with foll mods FMIC 2.5" SS Exhaust and down pipe, no cat Borla SS rear silencer Blitz Access ECU TRD/Exedy Clutch HKS M35I Iridium Spark Plugs (grade 7) TRD Spark Plug Wires Cusco LSD 1bar boost HI...
  6. C

    4E and 5E same bearings?

    Hi mates anybody knows if the 4e use the same crank bearings for the 5e engine? or not? pls let me know cheers
  7. C

    LSD Question

    Hi mates it normal when you are turning the car gets hard to drive? i mean the car tends to go traight not turn like a normal car? I have a Cusco LSD and its clunky and VERY hard to drive cheers
  8. C

    inlet pipes Q

    Hi mates! again another question!!! where this pipe goes? may I block it? any info will help! brgds from Chile!
  9. C

    normal engine Temp operation

    Hi mates anyone knows the normal engine temperature operation for 4EFTE? any info will help! brgds AJ
  10. C

    K16 turbocharger

    Hi All anybody uses a K16 Turbo on a 4EFTE? any experience? power figures? too laggy? any info pls post it! brgds AJ
  11. C

    what BHP!?

    Hi mates I´m doing a conversion for my Mini Clubman with a 4EFTE engine (almost complete BTW) need to know power figures with foll spec STD ex manifold CT9 turbo 2.5" downpipe and exhaust (without cat) Blitz Access Ecu TRD/Exedy Clutch Cusco LSD FMIC and 2" piping HKS M35i...
  12. C

    FMIC piping

    Hi Mates i was installing a FMIC and now need advise on Intercooler piping diameter, should i use 2" or 2,5" piping from turbo to intercooler and to intercooler to manifold? everything is home made due space (Mini Clubman with a 4EFTE engine inside!)
  13. C

    AFR on Blitz Access ECU

    hi mates anyone knows AFR during WOT on this ECU? brgds
  14. C

    LSD crownwheel torque settings

    Hi Mates anyone has the torque to Crownwheel to LSD? need to mount my LSD onto my Crownwheel and dont now the torque settings Brgds AJ
  15. C

    LSD type

    Hi mates anybody can help me with this LSD?? what kind of LSD is this? any info would be great :) thanks
  16. C

    New Member from Chile

    Hi all I´m Axel from Chile, I dont have an Starlet or a Glanza, BUT I have Mini Clubman (old one) working to be powered by a 4EFTE engine :) im reading the forum and I found very nice threads and all that I need to build my Mini Brgds from Chile Axel
Top